You will need to make a couple changes to operate at 1200 rather than the normal 1066.
CPU Host Clock Control - Enabled
CPU Host Frequency - 375
Performance Enhance - Standard
System Memory Mulitplier - 3.20B
DRAM Timing Selectable - Manual
CAS Latency - 5
tRCD - 5
tRP - 5
tRAS - 15
Advanced Timing Control (submenu)
tRRD - 4
tWTR - 4
tWR - 8
tRFC - 68 (Increase up to 80 to stabilize 8GB, 4 sticks)
tRTP - 4
Command Rate - 2
Load Line Calibration - Disabled
CPU VCore - 1.25V
MCH Core - 1.20V (1.40V for 8GB, sticks)
MCH/DRAM Reference - 1.0V
ICH I/O Core - 1.60V
ICH Core - 1.20V
DRAM Voltage - 1.90V
Thank you
GSKILL SUPPORT
CPU Host Clock Control - Enabled
CPU Host Frequency - 375
Performance Enhance - Standard
System Memory Mulitplier - 3.20B
DRAM Timing Selectable - Manual
CAS Latency - 5
tRCD - 5
tRP - 5
tRAS - 15
Advanced Timing Control (submenu)
tRRD - 4
tWTR - 4
tWR - 8
tRFC - 68 (Increase up to 80 to stabilize 8GB, 4 sticks)
tRTP - 4
Command Rate - 2
Load Line Calibration - Disabled
CPU VCore - 1.25V
MCH Core - 1.20V (1.40V for 8GB, sticks)
MCH/DRAM Reference - 1.0V
ICH I/O Core - 1.60V
ICH Core - 1.20V
DRAM Voltage - 1.90V
Thank you
GSKILL SUPPORT
Comment