Announcement

Collapse
No announcement yet.

a10 5800 k

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • a10 5800 k

    hello, my setup is
    AMD A10-5800K Trinity Quad-Core 3.8 GHz Socket FM2 100W AD580KWOHJBOX Desktop APU (CPU + GPU) with DirectX 11 Graphic ...

    LITE-ON DVD Burner SATA Model iHAS124-14



    1 x LITE-ON DVD Burner SATA Model iHAS124-14 - OEM

    BIOSTAR Hi-Fi A85S3 FM2 AMD A85X (Hudson D4) 6 x SATA 6Gb/s USB 3.0 HDMI Micro ATX AMD Motherboard
    1 x BIOSTAR Hi-Fi A85S3 FM2 AMD A85X (Hudson D4) 6 x SATA 6Gb/s USB 3.0 HDMI Micro ATX AMD Motherboard
    G.SKILL Ripjaws X Series 8GB (2 x 4GB) 240-Pin DDR3 SDRAM DDR3 1866 (PC3 14900) Desktop Memory Model F3-14900CL9D-8GBXL
    1 x G.SKILL Ripjaws X Series 8GB (2 x 4GB) 240-Pin DDR3 SDRAM DDR3 1866 (PC3 14900) Desktop Memory Model F3-14900CL9D-8GBXL

    Seagate Hybrid Drive ST1000DX001 1TB MLC/8GB 64MB Cache SATA 6.0Gb/s NCQ 3.5" Desktop SSHD

    I just got it to 1866 in the bios and amd overdrive is set to 4300 on the cpu
    What would be a safe overclock on this ram? cpuz says 9, 10, 10, 28
    temps are not bad at all so far.
    thanks,

  • #2
    Yes, you can raise first three timings by 1 and try DDR3-2133

    You may need to increase CPU-NB Voltage to help the memory controller support a higher frequency.

    Let us know how it goes.

    Comment


    • #3
      I talked to gskill on new egg and he said it was safe to raise voltage to 1.65
      set to 2133 and it booted up fine, must be pretty good ram.
      My new timings in cpuz are 11,14,15, 38 would you change anything else?
      thanks,I never changed the cpu voltage yet
      Last edited by fredrickvon; 12-17-2015, 05:50 PM.

      Comment


      • #4
        11-11-11-30 should be fine for 2133 1.550V

        Maybe lower with more voltage.

        Comment


        • #5
          Im not sure how to change timings on this motherboard.
          Does anyone know? I only have 1.65 volts as an option,cant change it to 1.55, I don't guess.

          Comment


          • #6
            ok I figured it out .I had to set for both sticks
            timings are 11, 11, 11, 30 now at 1.65 volts running stable.
            should I push it more or just leave it? I dont know how to lower the voltage below 1.65
            Im just looking for a safe overclock on stock fan
            Last edited by fredrickvon; 12-18-2015, 04:51 PM.

            Comment


            • #7
              What would I set it to next? just wondering

              Comment

              Working...
              X