I purchased this 2x8GB set based on my motherboards QLV memory list here: http://www.asrock.com/mb/Intel/Z270%20Taichi/#Memory
It's the ASRock Z270 Taichi.
Im not able to get the F4-4133C19D-16GTZKW kit booting to Windows at anything over 3733Mhz. The best timings I can get from the kit are 19-19-19-39 at 3733Mhz. At this speed and timings the voltages in H/W Monitor show:
DRAM Voltage = 1.376v
VCCIO = 1.224v
VCCSA = 1.280v
I tried these voltages, as well as bumping them up a little to try to get the 4133mhz to boot to windows, but it seems there is no configuration I can choose to get me there. Both sticks are in slot 2 and 4 in the mobo as that is considered "Priority 1" in the mobo manual.
At this point, im on the verge of returning the kit, and picking up the 3600CL16, ot 3600CL15 kit instead since it seems more likely I'll be able to run them at rated spec.
Any other suggestions that might get me to be able to run at 4133mhz?
It's the ASRock Z270 Taichi.
Im not able to get the F4-4133C19D-16GTZKW kit booting to Windows at anything over 3733Mhz. The best timings I can get from the kit are 19-19-19-39 at 3733Mhz. At this speed and timings the voltages in H/W Monitor show:
DRAM Voltage = 1.376v
VCCIO = 1.224v
VCCSA = 1.280v
I tried these voltages, as well as bumping them up a little to try to get the 4133mhz to boot to windows, but it seems there is no configuration I can choose to get me there. Both sticks are in slot 2 and 4 in the mobo as that is considered "Priority 1" in the mobo manual.
At this point, im on the verge of returning the kit, and picking up the 3600CL16, ot 3600CL15 kit instead since it seems more likely I'll be able to run them at rated spec.
Any other suggestions that might get me to be able to run at 4133mhz?
Comment