I bought 2 sets of used F2-6400CL5D-4GBPQ (2GBx4, total 8GB) DDR2 PC6400 to upgrade my RAM. Testing with 2 sticks for a trial run. As the memory settings were in AUTO, it gave me blue screens and freezes up after windows 7 boot up and started dumping physical memory
I set it to manual but I'm not sure how to configure the values in the advance setting for the TIMING. Please see the attached screenshots and guide me through the settings for . Thanks for your help.
My processor is AMD Phenom Quad-core 9750 Agena 125W. Not sure if any settings for the CPU needs to be tweaked as well. I had searched GOOGLE all over and found no luck.
Please help. Thanks in advance.
I set it to manual but I'm not sure how to configure the values in the advance setting for the TIMING. Please see the attached screenshots and guide me through the settings for . Thanks for your help.
My processor is AMD Phenom Quad-core 9750 Agena 125W. Not sure if any settings for the CPU needs to be tweaked as well. I had searched GOOGLE all over and found no luck.
Please help. Thanks in advance.
Comment