best regard.
A few months ago I bought a G-Skill memory kit for my system, which is not exactly optimized for x99 systems, and I could not do well overcloking to the Ram, the case is that the technical support of G_skill gave me the supposed configurations of the bios so that my system was stable, but when running AIDA64 the system takes out blue screen and restarts, the only stable counterfiguration is 2.133 mhz with CL 15-15-16-36 2T at 1.20v, but I would like to know if there is a latency stable for a higher frequency like 2.666mhz or a lower latency than CL15 for 2.133mhz
The settings that I got from G_skill support are: (it does not work)
DRAM Frequency = 2666MHz
DRAM Voltage = 1.20V
CL Timing = 15-15-15-35
Command Rate = 2
Ram: G-Skill F4-3200C16Q-64GVK
MotherBoard: Asus X99-Pro / USB 3.1
CPU: Intel® Core ™ i7-5960X Extreme Edition
I hope you can help me.
A few months ago I bought a G-Skill memory kit for my system, which is not exactly optimized for x99 systems, and I could not do well overcloking to the Ram, the case is that the technical support of G_skill gave me the supposed configurations of the bios so that my system was stable, but when running AIDA64 the system takes out blue screen and restarts, the only stable counterfiguration is 2.133 mhz with CL 15-15-16-36 2T at 1.20v, but I would like to know if there is a latency stable for a higher frequency like 2.666mhz or a lower latency than CL15 for 2.133mhz
The settings that I got from G_skill support are: (it does not work)
DRAM Frequency = 2666MHz
DRAM Voltage = 1.20V
CL Timing = 15-15-15-35
Command Rate = 2
Ram: G-Skill F4-3200C16Q-64GVK
MotherBoard: Asus X99-Pro / USB 3.1
CPU: Intel® Core ™ i7-5960X Extreme Edition
I hope you can help me.
Comment