G.SKILL TECH FORUM

Go Back   G.SKILL TECH FORUM ? Product Discussion ? DDR2

DDR2 Looking for help with DDR2 memory? Post a thread in here

Reply
Thread Tools Search this Thread Display Modes
  #11  
Old 10-06-2014, 11:47 AM
GSKILL TECH's Avatar
GSKILL TECH GSKILL TECH is offline
Administrator
 
Join Date: Jul 2008
Location: Los Angeles, California
Posts: 11,604
GSKILL TECH has disabled reputation
Default

Manually input timings.

DRAM Voltage and NB Voltage is completely off, leave them to AUTO.
__________________
Are you an overclocker? Have screen shots of your OC results? Please post and share your OC experience!

The new G.Skill Overclocking Section!

http://www.gskill.us/forum/forumdisplay.php?f=43
Reply With Quote
  #12  
Old 10-06-2014, 12:05 PM
Khylrion Khylrion is offline
Junior Member
 
Join Date: Sep 2014
Posts: 15
Khylrion is reading into overclocking
Default

What manual input timings would you recommend? I already tried that.

What is off on the DRAM voltage and the NB voltage? I have tried auto and then manually setting them and increasing the NB in 0.02 increments.

according to G.Skill specs this RAM is in the 1.8-1.9V range.

Thanks in advance for any assistance.

So far no luck with that.
Reply With Quote
  #13  
Old 10-07-2014, 02:28 PM
GSKILL TECH's Avatar
GSKILL TECH GSKILL TECH is offline
Administrator
 
Join Date: Jul 2008
Location: Los Angeles, California
Posts: 11,604
GSKILL TECH has disabled reputation
Default

Do you have the latest BIOS?
__________________
Are you an overclocker? Have screen shots of your OC results? Please post and share your OC experience!

The new G.Skill Overclocking Section!

http://www.gskill.us/forum/forumdisplay.php?f=43
Reply With Quote
  #14  
Old 10-07-2014, 07:56 PM
Khylrion Khylrion is offline
Junior Member
 
Join Date: Sep 2014
Posts: 15
Khylrion is reading into overclocking
Default

yes, 1703 is the latest BIOS (from 2009 :/ )
Reply With Quote
  #15  
Old 10-09-2014, 11:07 AM
GSKILL TECH's Avatar
GSKILL TECH GSKILL TECH is offline
Administrator
 
Join Date: Jul 2008
Location: Los Angeles, California
Posts: 11,604
GSKILL TECH has disabled reputation
Default

Let me see if we can get this tested on our end, should work properly.. I'll report back.
__________________
Are you an overclocker? Have screen shots of your OC results? Please post and share your OC experience!

The new G.Skill Overclocking Section!

http://www.gskill.us/forum/forumdisplay.php?f=43
Reply With Quote
  #16  
Old 10-09-2014, 11:01 PM
Khylrion Khylrion is offline
Junior Member
 
Join Date: Sep 2014
Posts: 15
Khylrion is reading into overclocking
Default

Quote:
Originally Posted by GSKILL TECH View Post
Let me see if we can get this tested on our end, should work properly.. I'll report back.
Thanks a bunch! Looking forward to that.
Reply With Quote
  #17  
Old 10-14-2014, 02:53 PM
GSKILL TECH's Avatar
GSKILL TECH GSKILL TECH is offline
Administrator
 
Join Date: Jul 2008
Location: Los Angeles, California
Posts: 11,604
GSKILL TECH has disabled reputation
Default

Have you tried two Pat modules and two G.Skill?

Bad news is the memory worked fine for us with that motherboard and Core 2 Quad/Duo CPUs.

More bad news is probably the other two slots are defective.
__________________
Are you an overclocker? Have screen shots of your OC results? Please post and share your OC experience!

The new G.Skill Overclocking Section!

http://www.gskill.us/forum/forumdisplay.php?f=43
Reply With Quote
  #18  
Old 10-15-2014, 03:05 AM
Khylrion Khylrion is offline
Junior Member
 
Join Date: Sep 2014
Posts: 15
Khylrion is reading into overclocking
Default

thanks for that. To be honest I only hear good news because when you guys managed I have higher hopes now :-).

Can you provide me with the bios screenshots of this MB with the X9650?

that way I can configure it exactly the same way.

to your questions:

I have tried with 2 pat and 2 gskill and that did not work. (in all possible combinations)

The slots can't be defective as 4 slots filled with patriot ram work perfectly fine.
Reply With Quote
  #19  
Unread 10-24-2014, 12:52 AM
Khylrion Khylrion is offline
Junior Member
 
Join Date: Sep 2014
Posts: 15
Khylrion is reading into overclocking
Default

would still appreciate those settings that did work in your test labs.

thanks in advance
Reply With Quote
  #20  
Unread 10-24-2014, 10:40 AM
GSKILL TECH's Avatar
GSKILL TECH GSKILL TECH is offline
Administrator
 
Join Date: Jul 2008
Location: Los Angeles, California
Posts: 11,604
GSKILL TECH has disabled reputation
Default

Can you post pictures of DRAM Timing Control?

We use Q9300 and E8400 so it is a little different
__________________
Are you an overclocker? Have screen shots of your OC results? Please post and share your OC experience!

The new G.Skill Overclocking Section!

http://www.gskill.us/forum/forumdisplay.php?f=43
Reply With Quote
Reply

Bookmarks


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -8. The time now is 01:23 AM.


Powered by vBulletin® Version 3.8.3
Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.
All rights reserved. Copyright ©1989-2013, G.Skill International Enterprise