F3-17000CL9-8GBSR - FSB Settings, Timing & Voltage

[scpolansky]

Howdy folks!

I'm running two sticks of F3-17000CL9-16GBSR Sniper (for a total of 8 GB in two slots - dual channel) in an MSI 890 GXM-G65 mobo. My processor is a 1090T.

I've got it running pretty stable with an FSB increase to 225 - which means the RAM is running at 1800 and CPU at 3.6mhz. (I'm using the 1:4 ratio and the DRAM voltage is 1.651)

I've got three questions:

1. What should my optimal stable timings be with the 225 FSB?
2. Should the voltage be set to 1.65 or 1.5?
3. Should I make any other tweaks to voltage? NB? SB?

Stability is key here.

Thanks!

-SCP