G.SKILL TECH FORUM

Go Back   G.SKILL TECH FORUM ? Product Discussion ? SSD

SSD Problem or question about your SSD? Post a thread in here

Reply
 
Thread Tools Search this Thread Display Modes
  #1  
Old 05-02-2012, 04:06 PM
vantheshark vantheshark is offline
Junior Member
 
Join Date: May 2012
Posts: 1
vantheshark is getting a feel for overclocking
Red face BSOD: RAMPAGE-IV-GENE + GSKILL Ripjaws F3-12800CL9D-8GBXL

Hi

I have several BSOD while running Windows 7 Ultimate. I managed to reinstall Win7 from scratch with 1 stick of RAM (4G) and that seemed to work. However, when I install all 16GB Ram, the system seems not stable and several BSODs happened randomly.

Here is my new machine, I used default BIOS settings. BIOS was updated to latest version 1305


MOBO: Asus Rampage IV Gene-X7 (BIOS Version 1305 2012.04.18 update)
CPU : Hex Core i7-382
GPU : 1G GTX550Ti ASUS (Latest driver)
RAM : G.Skill Ripjaws-X F3-12800cl9d-8GBXL (16G total)
PSU : CoolerMaster RS-650
WIFI CARD: TP-LINK TL-WDN4800








I tried to run Memtest86+ v4.2 and amazingly, here is the result:





I ran the test with only 2 sticks and it produced so many errors, but it seemed to be fine when I ran separately. I also ran memory test using Window Memory Diagnostic but it said no errors at all for 16GB.

Beside that, I had run the GPU stress test using FurMark, there was not any BSOD so I reckon GPU is unlikely the culprit.


Please help, is it the RAM or MOBO problem? Some guys told me that it's because of the KIT i'm using is dual channel where the MOBO supports quad channel ???
Reply With Quote
  #2  
Old 05-02-2012, 09:22 PM
Ranxerox's Avatar
Ranxerox Ranxerox is offline
Senior Member
 
Join Date: Jul 2010
Posts: 118
Ranxerox is reading into overclocking
Default

Disconnect the wireless card and do memtest only with vga
Reply With Quote
  #3  
Old 05-03-2012, 04:05 AM
GSKILL's Avatar
GSKILL GSKILL is offline
Administrator
 
Join Date: Jul 2008
Posts: 3,068
GSKILL is knowledgeable to help others
Default

Hi

did you try with the XMP profile? clear the CMOS and load the XMP profile, if still with same issue, raising the DRAM voltage to 1.6v ~ 1.65v and try again. and we will suggest you return the two 8GB kits for another one 16GB kit, because using two different memory may cause compatibility issue.

and it's not the dual/quad channel problem.
Reply With Quote
Reply

Bookmarks

Tags
rampage iv gene

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -8. The time now is 03:33 AM.


Powered by vBulletin® Version 3.8.3
Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.
All rights reserved. Copyright 1989-2013, G.Skill International Enterprise