 |
 |
    |
|
|||||||
| DDR3 Looking for help with DDR3 memory? Post a thread in here |
 |
|
|
Thread Tools | Search this Thread | Display Modes |
|
|
|
#1
01-21-2012, 09:17 PM
|
|||
|
|||
need some help getting my ram to run at 2400
[ RipjawsZ] F3-19200CL11Q-16GBZHD (4Gx4)
Asus P9X79 DELUXE (Bios v.0906) CPU: Intel i7-3930K BFG 1000w PSU 2x raedon 5870 GPUs I cannot for the life of me get the ram to run at 2400 mhz. It seems to like 2133. I am new to this uefi bios, so there is probably something I am missing or doing wrong. I set the xmp profile for 2400 but it was a no go. Could this be a bios problem? Any help will be greatly appreciated!!!! Thanks in advance 
|
|
#2
02-06-2012, 08:50 AM
|
||||
|
||||
|
Have you tried manual settings? Please post pictures with XMP enabled, it should have no problem with that motherboard.
Thank you GSKILL TECH
__________________
Are you an overclocker? Have screen shots of your OC results? Please post and share your OC experience! The new G.Skill Overclocking Section!  http://www.gskill.us/forum/forumdisplay.php?f=43
|
|
#4
02-07-2012, 09:36 AM
|
||||
|
||||
|
What are the symptoms? Booting but unstable? Try boosting the VCCSA voltage a little more to see if that helps.
Thank you GSKILL TECH
__________________
Are you an overclocker? Have screen shots of your OC results? Please post and share your OC experience! The new G.Skill Overclocking Section! http://www.gskill.us/forum/forumdisplay.php?f=43
|
|
| Bookmarks |
«
Previous Thread
|
Next Thread
»
| Thread Tools | Search this Thread |
| Display Modes | |
Hybrid Mode
|
|
All times are GMT -8. The time now is 10:24 AM.