F4-3000C15Q-16GRR two kits together

[Ranxerox]

Hello again

My shop is offering me two F4-3000C15Q-16GRR kits to work together with XMP

According to the most specialty shops are the best kits of Gskill

http://www.gskill.com/en/product/f4-3000c15q-16grr

My motherboard is the Gigabyte GA-X99-G1 Gaming WIFI with BIOS F8a

http://www.gigabyte.com/products/pro...id=5126&dl=#ov

My CPU is the Intel Core i7-5930K.

I have no plans to overclock for now.

I will keep you informed if it works properly or not

Regards to GSkill forum

[GSKILL TECH]

remember XMP is designed for each kit, so if you use two kits, you may need to use manual settings and configuration

Keep us posted!

[Ranxerox]

My shop technician has struggled with the F4-3000C15Q-16GRR
Let's try with just a F4-2666C15Q-16GRR G.Skill kit and F7 BIOS

http://www.gskill.com/en/product/f4-2666c15q-16grr


Regards to GSkill forum

[Ranxerox]

My shop technician has struggled with the F4-3000C15Q-16GRR
Let's try with just a F4-2666C15Q-16GRR G.Skill kit and F7 BIOS

http://www.gskill.com/en/product/f4-2666c15q-16grr


Regards to GSkill forum

I already have a PC with two memory kit and enabled XMP.
It is super stable with F7 BIOS









Only with XMP and speed Stock

[GSKILL TECH]

Nice, lucky with those two kits!

[Ranxerox]

What if I complain is how green are the BIOS.

Only I complain that the BIOS are still very green.

As touches something corrupts the system

[Ranxerox]

My luck ended with XMP.

I have two identical kits F4-2666C15Q-16GRR.
My motherboard is a Gigabyte GA-X99-G1 Gaming WIFI with BIOS F9x.

I installed Windows 10 and something happened that no longer allow me to use the XMP; BIOS was reset and only allowed me to work at 2133 values by default.

I went back to Windows 8.1 and is the same; I can not activate XMP.

I made a clear CMOS but problems persist.
The SSD turns on and off to reset and default values are loaded.

With older BIOS is the same.
BIOS F9x always worked well for me until August.

The default system is stable but when active XMP to restart or shut down the BIOS is reset.
I've given up; I will work to speed stock.
I never will mix two kits; lesson learned.

Gigabyte says it's not their problem if the motherboard works well at speed stock

[GSKILL TECH]

Have you tried DDR4-2400?

With only one kit installed XMP works fine?

[Ranxerox]

I tried to 2400 and does not work.
I'll try one kit