Announcement

Collapse
No announcement yet.

QCode 55 with Maximas IX Formula Z270

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • QCode 55 with Maximas IX Formula Z270

    I am getting a Q Code 55 using F4-3000C14D-32GTZ, I have updated the BIOS, I think, since I never see the BIOS screen at all. Any Ideas . The memory is not on ASUS QVL but it is on GSkills for this board

  • #2
    Did you use the recommended slots? Can you get past 55 with MemOK?

    If not, try it again one module at a time using different slots. Maybe there is an issue with the modules or the MB and that is the easiest way to find out.
    Team HardwareLUXX | Show off your G.SKILL products!

    Comment


    • #3
      Thanks for the suggestion and...I put each stick in A1 and got a QCode of 53(invalid memory type or speed. I tried MemOK with both and no change. Before trying the A1 slot I tried MemOK with each combination of memory with no luck

      Comment


      • #4
        Might be a defective motherboard if nothing boots up. Double check installation, CPU socket pins should be perfect, CPU cooler not too tight or loose..

        A2 B2 are the initial slots so they should boot up to default settings DDR4-2133 C15 1.20V

        Comment

        Working...
        X