These settings are for any DDR3-2000 kit on the Gigabyte EX58-UD3R motherboard
In MIT (MB Intelligent Tweaker):
CPU Clock Ratio - 17x for 2.8GHz
QPI Link Speed - AUTO
Base Clock Control - Enabled
BCLK Frequency - 167
Performance Enhance - Standard
Extreme Memory Profile - Disabled
System Memory Multiplier - 12
Uncore & QPI Features
Uncore Frequency - 4008
DRAM Timing Selectable - Manual
CAS Latency Time - 9
tRCD - 9
tRP - 9
tRAS - 24
Enter these for the other three as well.
Channel A Timing Settings
Advanced Timings
Command Rate - 2
Advanced Voltage Control
Load-Line Calibration - Disabled
CPU Vcore - 1.32V
QPI/VTT Voltage - 1.60V
DRAM Voltage - 1.640V
Rest to AUTO
Thank you
GSKILL SUPPORT
In MIT (MB Intelligent Tweaker):
CPU Clock Ratio - 17x for 2.8GHz
QPI Link Speed - AUTO
Base Clock Control - Enabled
BCLK Frequency - 167
Performance Enhance - Standard
Extreme Memory Profile - Disabled
System Memory Multiplier - 12
Uncore & QPI Features
Uncore Frequency - 4008
DRAM Timing Selectable - Manual
CAS Latency Time - 9
tRCD - 9
tRP - 9
tRAS - 24
Enter these for the other three as well.
Channel A Timing Settings
Advanced Timings
Command Rate - 2
Advanced Voltage Control
Load-Line Calibration - Disabled
CPU Vcore - 1.32V
QPI/VTT Voltage - 1.60V
DRAM Voltage - 1.640V
Rest to AUTO
Thank you
GSKILL SUPPORT
Comment