GSKILL

Intel DX58SO and G.SKILL F3-12800CL9T-6GBNQ

--------------------------------------------------------------------------------

I bought the following kit online G.SKILL F3-12800CL9T-6GBNQ 6GB DDR3 3X2GB DDR3-1600 CL 9-9-9-24 Triple Channel Memory Kit. It only seems to boot properly at 1066mhz

I'm running it on an intel DX58SO motherboard with an i7 920 processor.

According to intel this board supports 1600mhz. (see link)


HTML Code:
http://www.intel.com/products/deskto...-overview.htmI don't plan on overclocking the cpu or the ram. I just need to know the ideal settings to get this ram running at 1600mhz. i.e. timings/multipliers/voltages and anything else I may need to set.

Thanks in advance.

EVEREST v4.60.1500
Benchmark Module 2.3.237.0
Homepage http://www.lavalys.com/
Report Type Quick Report

Generator Frank
Operating System Microsoft Windows Vista Ultimate 6.1.7100
Date 2009-09-16
Time 00:27


Memory Latency

--------------------------------------------------------------------------------


CPU CPU Clock Motherboard Chipset Memory CL-RCD-RP-RAS Latency

Pentium EE 965 4500 MHz Asus P5WD2 Premium i955X Dual DDR2-841 5-5-5-15 69.0 ns
Most recent setting, 1.375vcore,mch 1.4v
Rated fsb 1120 (16multix280bus speed)
View Conversation Edit Report Today 09:09 PMsubterfug09
Gskill, I read all the posts between you and RetsamradassT.. It was VERY helpful, I post this the other day hoping someone would help me out,a lot of views,but no replies. I am trying to get my rig set up to be 1:1 ram, I am coming lose,but no cigar. Could you please tell me where I should post this, or please share some of you expertise with me?
Thank you,

http://www.gskill.us/forum/showthread.php?t=1223

Please help! I am clueless as to why windows 7 is freezing.

Im still waiting for technical support on my issue, I have not heard anything from g.skill for some days!! Please help, if not then I would like to exchange this for some other comparable ram.