Announcement

Collapse

UNDER CONSTRUCTION: G.Skill Forum

Hello Everyone

The G.Skill Technical forum will be under construction during the month of February. There may be random down time, so we sincerely appreciate your patience and cooperation during this time. We are excited to bring you a more interactive forum to share information. For any technical assistance or issue that may require more attention, please contact us directly via other methods such as email, telephone, social media, NewEgg Chat, and more. Support is available through any avenue you can reach us.

ustech@gskillusa.com
techsupport@gskill.com


We hope for a quick and smooth transition

Thank you for your understanding

GSKILL SUPPORT
See more
See less

RMA from Lebanon...

Collapse
X
  • Filter
  • Time
  • Show
Clear All
new posts

  • RMA from Lebanon...

    Hi..

    My rig:
    -Core 2 Quad Q6600 G0 @ 3.2GHz - 1600MHz FSB 400 x 8.0
    -Gskill RipjawsX F3-12800CL6D-4GBXH "X.M.P profile 6-8-6-24-2N"
    -Asus Rampage Extreme X48
    -Gigabyte Odin 800w (Quad Rails totaling 62A@12v+)

    My Location: Lebanon, Middle East

    I've bought Gskill Ripjaws X Series F3-12800CL6D-4GBXH Dualchannel kit in April 27 2011 and delivered May 6 2011 from MemoryC/AMAZON , and experienced lots of BSOD's and errors with this kit..

    I've sent an E-Mail to Gskill's tech-support and they said that my motherboard will not hold on stable if I'm using 1600mhz RAM !

    Asus Rampage Extreme X48 was designed to handle even 2000mhz RAM !!

    Also they recommend to run the memory @ 1.65v "default is 1.5v" on my motherboard with one of the following settings to get it stable @ 1600mhz:

    "testing each stick alone"
    1st option:
    * FSB Termination Voltage = 1.3
    * Northbridge Voltage = 1.45v
    * Memory Voltage = 1.65v
    * Timings = 6-8-6-24 2N "default"

    and if it fails, try this:
    2nd option:
    * FSB Termination Voltage = 1.3
    * Northbridge Voltage = 1.45v
    * Memory Voltage = 1.65v
    * Timings = 7-8-7-24 2N"

    I did that and found that one stick did run stable @ 1600mhz 6-8-6-24-2N with 1.65v "the first option they recommend" and it did pass "MemTest for Windows" 1 hour test but I still get BSOD's sometimes, the second stick is totally unstable and even cant run windows easily and it still get lots of errors in "MemTest for Windows" even with the second option they recommend @ CL7 1600mhz or 1333mhz or 1066 or whatever I did...

    I've sent and E-Mail to MemoryC for a replacement and they did provide me RMA number but when I went to ARAMEX to send it but found that it will cost me 49$ for shipping from Lebanon to USA or Ireland "MemoryC HQ" !

    I've check with FeDEX & UPS also and all are 50$+, so I've sent another email to MemoryC for help and they told me to contact Gskill directly to solve this..

    50$ for shipping + Customes and VAT again for the replacement

    So, how to send it for a replacement ? please help..

    This kit is blazing fast and I want them but need a replacement..

  • #2
    UPDATE:

    The Overnight MemTest @ 1600 6-8-6-24-2N 1.65v failed !!

    Another Overnight test done @ 1600 6-8-6-24-2N 1.7v passed without errors for more than 5 hours

    The other stick failed even @ 1066 7-8-7-24-2N 1.7v , can't pass 1% testing without tons of errors

    HELP!!!!!

    Comment


    • #3
      http://www.gskill.com/rma.php

      You will need to send it to our Taiwan office.

      Thank you
      GSKILL TECH
      Are you an overclocker? Have screen shots of your OC results? Please post and share your OC experience!

      The new G.Skill Overclocking Section!

      http://www.gskill.us/forum/forumdisplay.php?f=43

      Comment

      Working...
      X