Announcement

Collapse
No announcement yet.

the software finally works on my AsRock X299 board! (as of 1.06.68)

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • the software finally works on my AsRock X299 board! (as of 1.06.68)

    i have 2 kits of F4-3600C16Q-32GTZR, which are the 4x8GB 3600MHz 16-16-16-36 memory kits. i had them for a few months now and was never able to get the software to detect all the sticks at the same time. the amount of sticks it would detect and the sticks that were detected was always random on every boot. but this version finally fixed it. out of the 50 or so boots since i installed the new software, only 1 time i had 1 stick that wasn't detected (it was doing the default thing) but other than that, all 8 sticks appear in the GSkill software and all 5 LEDS on all stick are individually addressable.

    as a side note, i was able to overclock my RAM to 4000MHz with a modest voltage bump to 1.37V, had it running at the speed since June.

    thanks!

    system:
    7960X @ 4.5GHz
    AsRock Fatal1ty X299 Professional i9 XE
    2x F4-3600C16Q-32GTZR
    Last edited by solomonshv; 10-17-2018, 04:20 PM.
Working...
X