Can not set F4-3200C16Q-32GTZB to 3200

[vman2018]

Some help, got F4-3200C16Q-32GTZB on MSI X470 Gaming Pro Carbon with Ryzen 7 2700X. When selecting XMP1 it reads 2933 and it works. But when I select XMP2 it reads 3200 but it does not stay with the setting and goes back the 2133.

How can I set to stay at 3200 with CL 16-18-18-38 1.35v.

Thanks

[GSKILL TECH]

Do you have the latest BIOS? Which slots do you have the RAM installed in? Try boosting SoC Voltage to see if it can help improve stability.

[vman2018]

Yes the latest is install. This a four sticks so all slots install. As for the SoC voltage I can find it in the bios can you explain were it is or its location?
Thanks

[vman2018]

Try manually setting but it beep for 3 time for 3 and 1 beep then it rest to 2133

[GSKILL TECH]

What did you set it to?

Check to see what it is running at for DDR4-2933, then make sure it is higher for 3200.

We do not have that motherboard rated capable just yet, so most likely it is a BIOS limitation and requires an update to potentially enhance capabilities.

[Vik.88]

Hi, I have the same problem. I have a PC with an MSI x470 gaming pro carbon motherboard, ryzen7 2700x CPU, RAM F4-3200C14D-16GVR and latest BIOS available. Even I can not make these RAM work at 3200mhz activating the A-XMP profile or Memory try It. The most I managed to have is 3066MHz. online I read that ryzen is a bit 'picky and that adjusting some sub timing you should solve and make work at 3200mhz RAM. do you know something?