Announcement

Collapse

UNDER CONSTRUCTION: G.Skill Forum

Hello Everyone

The G.Skill Technical forum will be under construction during the month of February. There may be random down time, so we sincerely appreciate your patience and cooperation during this time. We are excited to bring you a more interactive forum to share information. For any technical assistance or issue that may require more attention, please contact us directly via other methods such as email, telephone, social media, NewEgg Chat, and more. Support is available through any avenue you can reach us.

ustech@gskillusa.com
techsupport@gskill.com


We hope for a quick and smooth transition

Thank you for your understanding

GSKILL SUPPORT
See more
See less

Q-Code 55 with Ripjaws V 1800MHz CL16 + Maximus VIII Hero + i5 6600K 4.5GHz

Collapse
X
  • Filter
  • Time
  • Show
Clear All
new posts

  • Q-Code 55 with Ripjaws V 1800MHz CL16 + Maximus VIII Hero + i5 6600K 4.5GHz

    Hi, I have an assembled computer desktop with this specs: http://valid.x86.fr/mgxir5
    Sometimes, when I turn it on, the Asus Maximus VIII Hero motherboard show Q-Code "55" (more often at reboot; the manual says "Memory not installed"), and I need to forze to shutdown and then turn it on again hoping it doesn't show it again. Few times it show Q-Code "34" (the manual says "CPU post-meemory initialization") instead of "55".
    I tried to install only one memory kit (3600C16D-16GVK) of 8GB instead of 2 x 16GB, but didn't work either. When using the memory and XMP 2.0 configuration but with the CPU at lower speed (3.5 without boost) the problem didn't occured. Is there some way so solve? Thank you.

  • #2
    Boost CPU vCore slightly to see if you can stabilize the processor
    Are you an overclocker? Have screen shots of your OC results? Please post and share your OC experience!

    The new G.Skill Overclocking Section!

    http://www.gskill.us/forum/forumdisplay.php?f=43

    Comment


    • #3
      Originally posted by GSKILL TECH View Post
      Boost CPU vCore slightly to see if you can stabilize the processor
      I have vCore at offset mode (1.37V max). Can I push it even more manually?

      Comment


      • #4
        Yes, you can increase and lower frequency based on how the system responds to the change.
        Are you an overclocker? Have screen shots of your OC results? Please post and share your OC experience!

        The new G.Skill Overclocking Section!

        http://www.gskill.us/forum/forumdisplay.php?f=43

        Comment

        Working...
        X