Announcement

Collapse

UNDER CONSTRUCTION: G.Skill Forum

Hello Everyone

The G.Skill Technical forum will be under construction during the month of February. There may be random down time, so we sincerely appreciate your patience and cooperation during this time. We are excited to bring you a more interactive forum to share information. For any technical assistance or issue that may require more attention, please contact us directly via other methods such as email, telephone, social media, NewEgg Chat, and more. Support is available through any avenue you can reach us.

ustech@gskillusa.com
techsupport@gskill.com


We hope for a quick and smooth transition

Thank you for your understanding

GSKILL SUPPORT
See more
See less

Ripjaws V fails memtest 86

Collapse
X
  • Filter
  • Time
  • Show
Clear All
new posts

  • Ripjaws V fails memtest 86

    Found my computer locked up the other morning and tried to reboot. I finally got it to run memtest and found numerous errors. I started checking the 2 stick individually and found 1 stick would pass even after running all night (10 passes I believe) but 1 stick had numerous errors start showing up on the third pass. Currently running with the 1 good stick. I checked the RMA page and can't find my main board.

    Build Specs:
    Main board: Gigabyte B250M - Gaming 3
    Processor: Intel Pentium G4600
    Memory: G.SKILL Ripjaws V Series 16GB (2 x 8GB) 288-Pin DDR4 SDRAM DDR4 2400
    Power Supply: CORSAIR CX-M Series CX550M 550W 80 PLUS BRONZE

    The serial number on the bad stick is: 1722B6001577043

    Any suggestions welcome.

  • #2
    Additional info

    I'm also not running the memory at 2400. When I had the profile set at XMP to run at 2400 the system became unstable so I backed off.

    Comment


    • #3
      Send them in for RMA exchange and a new kit should work better:

      http://www.gskill.com/en/rma
      Are you an overclocker? Have screen shots of your OC results? Please post and share your OC experience!

      The new G.Skill Overclocking Section!

      http://www.gskill.us/forum/forumdisplay.php?f=43

      Comment

      Working...
      X