No announcement yet.

F3-10666CL9D-8GBRL + Intel DH55HC + i3 550 @ 3.20GHz

  • Filter
  • Time
  • Show
Clear All
new posts

  • F3-10666CL9D-8GBRL + Intel DH55HC + i3 550 @ 3.20GHz

    I am attempting to install 2 additional 4BG modules of F3-10666CL9D-8GBRL. Original RAM is same model, but manufacture date Dec 2010.

    With all 4 modules installed, I'm getting a hard (like power supply failure) reboot loop when starting Windows. After removing original modules and trying new modules (tried both together and 1 at a time), I'm getting a quick (no power blip) reboot loop when starting Windows.

    So far, I have reset CMOS and updated BIOS to lastest version.

    After reading this thread regarding double-sided vs single-sided modules, I believe I need to exchange for this:


    At this point, I would like to confirm that I should exchange the modules for the NT version, or is there some BIOS configuring I can look into?

    Additionally, does the hard reboot loop w/the full 16GB mean I have a power supply issue as well?

    Disclosure: I'm extremely limited in hardware knowledge, and even less so in BIOS.

    Thanks in advance for any help you can provide.
    Last edited by iahawk; 04-11-2017, 12:14 PM.

  • #2
    Yes, the NT model should work much better. The kit should be plug and play. Make sure you have the latest BIOS.


    • #3
      Thank you!