Announcement

Collapse
No announcement yet.

Trying to get DDR3 RAM to 1866 speeds.

Collapse
X
  • Filter
  • Time
  • Show
Clear All
new posts

  • Trying to get DDR3 RAM to 1866 speeds.

    Hello, I've had my system for a while now and just realized my ram isn't running at 1866 but at 1333 speeds.

    When I was building my system I went for the G.Skill F3-1866C10D-16GAB sticks, installed in slots 2 and 4 as noted in the manual. I know these are XMP optimized for intel motherboards, so I just need some guidance in getting my timings correct. (For a total of 16gb of ram)

    I've used CPU-Z and found out the timings of my ram, there are 2 XMP profiles, I just need to know what exact timings I need to use to get these to work correctly.

    I was experimenting on my CPU earlier everything has been set back to defaults.

    Motherboard:ASUS Sabertooth 990FX R 2.0 (noctua nh-d14 fan)
    CPU:AMD FX 9590
    RAM:G.Skill F3-1866C10D-16GAB
    GPU: 2x R9 290X crossfire

    I'll include photos of my UEFI and CPU-Z
    http://imgur.com/Ke9MmHG

    http://imgur.com/4SHKgU2

    http://imgur.com/cwFhOWE

    http://imgur.com/WiqYSFt

    imgur.com/xg4ViEZ

  • #2
    Test XMP to see how it works.

    Also, make sure modules are installed in the same color slots furthest away from the CPU
    Are you an overclocker? Have screen shots of your OC results? Please post and share your OC experience!

    The new G.Skill Overclocking Section!

    http://www.gskill.us/forum/forumdisplay.php?f=43

    Comment

    Working...
    X