Announcement

Collapse

UNDER CONSTRUCTION: G.Skill Forum

Hello Everyone

The G.Skill Technical forum will be under construction during the month of February. There may be random down time, so we sincerely appreciate your patience and cooperation during this time. We are excited to bring you a more interactive forum to share information. For any technical assistance or issue that may require more attention, please contact us directly via other methods such as email, telephone, social media, NewEgg Chat, and more. Support is available through any avenue you can reach us.

ustech@gskillusa.com
techsupport@gskill.com


We hope for a quick and smooth transition

Thank you for your understanding

GSKILL SUPPORT
See more
See less

Ausu 990fx r3.0 fx 8350,$gskill ram issues

Collapse
X
  • Filter
  • Time
  • Show
Clear All
new posts

  • Ausu 990fx r3.0 fx 8350,$gskill ram issues

    id like to say I have done the fallowing set up with this build set up

    MB; AUSU SABERTOOTH 990FX R3.0

    CPU; AMD FX 8350 BE

    GPU; FXF RX 480 8GB

    RAM;G SKILL RIPJAWS F3-14900CL9D-8GBXL
    DDR3-1866 CL9-10-9-28 1.5V
    XMP PC3-1400 4GBX2

    DONE THE FALLOWING

    [FX or A Series CPU]

    Method 1.

    A. Enable DOCP/EOCP in BIOS.
    a. If unstable, raise CPU-NB Voltage in addition to the above.

    B. Set CPU-NB Voltage +0.05V to +0.1V depending on stability

    C. F10, save, exit, and everything should be ready to go.


    Method 2.

    A. Set DRAM Frequency to DDR3-1866

    B. Set DRAM Timings to tCL - tRCD - tRP - tRAS - Command Rate
    (that the memory is rated for)

    C. Set DRAM Voltage to what the memory is rated for.
    (Manually set even if default 1.50V)

    D. Set CPU-NB Voltage +0.05V to +0.1V depending on stability

    E. F10, save, exit, and everything should be ready to go.

    on that note my ram is running @ a freq of 936.15 but with windows memory issues
    Last edited by Mudafugas; 12-06-2016, 07:15 AM.

  • #2
    thought i could run my current ram @ 1800 same timings i suppose not


    http://dlcdnet.asus.com/pub/ASUS/mb/...419.1480659055
    Last edited by Mudafugas; 12-02-2016, 10:28 PM.

    Comment


    • #3
      936 x 2 = DDR3-1872

      DDR is double data rate so real frequency in MHz * 2 is the effective DDR frequency.
      Are you an overclocker? Have screen shots of your OC results? Please post and share your OC experience!

      The new G.Skill Overclocking Section!

      http://www.gskill.us/forum/forumdisplay.php?f=43

      Comment


      • #4
        ok so there is a xmp profile for the fallowing ram RAM;G SKILL RIPJAWS F3-14900CL9D-8GBXL
        DDR3-1866 CL9-10-9-28 1.5V
        XMP PC3-1400 4GBX2

        what i am experiencing is my system constantly tells me to close programs as im low on memory i have check allocated memory ect i have came to a conclusion it is a windows 10 issue

        not sure what steps to take to accommodate this memory problem perhaps a fresh windows install ?

        Comment


        • #5
          Yes, that can help reset everything
          Are you an overclocker? Have screen shots of your OC results? Please post and share your OC experience!

          The new G.Skill Overclocking Section!

          http://www.gskill.us/forum/forumdisplay.php?f=43

          Comment

          Working...
          X