Hi,
I have just set up a AT3IONT-I system. I am using this RAM and running it at 1066; right now it is at 1067MHz on AUTO. I would like to set the timings for it; and properly set up voltage.
I am guessing, I can set voltage to 1.35V at this speed; though I am not entirely sure. I am not really concerned about this; but I would like to reduce it a bit, to avoid it running hot. I have a--nearly--passively cooled system; using a Lian Li HTPC Chassis.
The Motherboard only allows max. settings of tCL 11 - tRCD 7 - tRP 7 - tRAS 31 - CMD 2T; and other settings of tRRD 15 - tRC 31 - tWR 6 - tWTR 15 - Burst Length 4. Aside from that; no other settings are available.
It seems to be fully functional on auto; but--as I am using it as a server--I would like to know recommended settings and voltages.
Thanks,
I have just set up a AT3IONT-I system. I am using this RAM and running it at 1066; right now it is at 1067MHz on AUTO. I would like to set the timings for it; and properly set up voltage.
I am guessing, I can set voltage to 1.35V at this speed; though I am not entirely sure. I am not really concerned about this; but I would like to reduce it a bit, to avoid it running hot. I have a--nearly--passively cooled system; using a Lian Li HTPC Chassis.
The Motherboard only allows max. settings of tCL 11 - tRCD 7 - tRP 7 - tRAS 31 - CMD 2T; and other settings of tRRD 15 - tRC 31 - tWR 6 - tWTR 15 - Burst Length 4. Aside from that; no other settings are available.
It seems to be fully functional on auto; but--as I am using it as a server--I would like to know recommended settings and voltages.
Thanks,
Comment