Announcement

Collapse
No announcement yet.

Can I run F3-2400C10Q-32GTX at 1600MHz and 1.5v?

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Can I run F3-2400C10Q-32GTX at 1600MHz and 1.5v?

    Hi,

    could you please help me with two questions?

    (1) Is this F3-2400C10Q-32GTX memory kit compatible with an Intel DQ77CP motherboard and an i7-3770?

    (2) If so, can I run this kit at 1600MHz and 1.5v?

    Thank you

  • #2
    If you are not using the XMP, it defaults to DDR3-1333 at 1.50V. So for DDR3-1600 you would have to manually configure the memory settings. A kit like this shouldn't have any trouble running DDR3-1600 9-9-9-24 at 1.50V. Then run some stability tests just to make sure, since these settings were not factory tested.
    Team HardwareLUXX | Show off your G.SKILL products!

    Comment


    • #3
      Thank you.

      And I assume my motherboard is indeed compatible?

      Comment


      • #4
        In theory at least, but this configuration was probably never tested by either G.SKILL or Intel.
        Team HardwareLUXX | Show off your G.SKILL products!

        Comment

        Working...
        X