Hi there, nice to be here.
I am about to get this set
RAM G.SKILL F3-12800CL8T-12GBRM for my ASUS P6T mobo. The other set i have is an OCZ set with the following specs
[ DIMM1: OCZ OCZ3X1600LV2G ]
Memory Module Properties:
Module Name OCZ OCZ3X1600LV2G
Serial Number None
Module Size 2 GB (2 ranks, 8 banks)
Module Type Unbuffered DIMM
Memory Type DDR3 SDRAM
Memory Speed DDR3-1066 (533 MHz)
Module Width 64 bit
Module Voltage 1.5 V
Error Detection Method None
Refresh Rate Normal (7.8 us)
Memory Timings:
@ 533 MHz 8-7-7-16 (CL-RCD-RP-RAS) / 27-59-4-8-4-4-16 (RC-RFC-RRD-WR-WTR-RTP-FAW)
@ 533 MHz 7-7-7-16 (CL-RCD-RP-RAS) / 27-59-4-8-4-4-16 (RC-RFC-RRD-WR-WTR-RTP-FAW)
@ 457 MHz 6-6-6-14 (CL-RCD-RP-RAS) / 23-51-4-7-4-4-14 (RC-RFC-RRD-WR-WTR-RTP-FAW)
@ 380 MHz 5-5-5-12 (CL-RCD-RP-RAS) / 19-42-3-6-3-3-12 (RC-RFC-RRD-WR-WTR-RTP-FAW)
Extreme Memory Profile v1.2:
Profile Name Enthusiast (Certified)
Memory Speed DDR3-1600 (800 MHz)
Voltage 1.65 V (Memory Controller: 1.40 V)
Refresh Period (tREF) 7.9 us
Recommended DIMMs Per Channel 1
@ 800 MHz 8-8-8-24 (CL-RCD-RP-RAS) / 36-72-0-5-12-6-6-24-8 (RC-RFC-CR-RRD-WR-WTR-RTP-FAW-WCL)
@ 700 MHz 7-7-7-21 (CL-RCD-RP-RAS) / 32-63-0-5-11-6-6-21-7 (RC-RFC-CR-RRD-WR-WTR-RTP-FAW-WCL)
@ 600 MHz 6-6-6-18 (CL-RCD-RP-RAS) / 27-54-0-4-9-5-5-18-6 (RC-RFC-CR-RRD-WR-WTR-RTP-FAW-WCL)
Extreme Memory Profile v1.2:
Profile Name Extreme
Memory Speed DDR3-1700 (850 MHz)
Voltage 1.65 V (Memory Controller: 1.40 V)
Refresh Period (tREF) 7.9 us
Recommended DIMMs Per Channel 1
@ 875 MHz 9-9-9-27 (CL-RCD-RP-RAS) / 40-79-0-6-14-7-7-27-8 (RC-RFC-CR-RRD-WR-WTR-RTP-FAW-WCL)
@ 777 MHz 8-8-8-24 (CL-RCD-RP-RAS) / 35-70-0-5-12-6-6-24-8 (RC-RFC-CR-RRD-WR-WTR-RTP-FAW-WCL)
@ 680 MHz 7-7-7-21 (CL-RCD-RP-RAS) / 31-62-0-5-11-6-6-21-7 (RC-RFC-CR-RRD-WR-WTR-RTP-FAW-WCL)
@ 583 MHz 6-6-6-18 (CL-RCD-RP-RAS) / 27-53-0-4-9-5-5-18-6 (RC-RFC-CR-RRD-WR-WTR-RTP-FAW-WCL)
Memory Module Features:
Auto Self Refresh (ASR) Supported
DLL-Off Mode Not Supported
Extended Temperature Range Not Supported
Extended Temperature 1X Refresh Rate Not Supported
On-Die Thermal Sensor Readout (ODTS) Not Supported
Partial Array Self Refresh (PASR) Not Supported
RZQ/6 Supported
RZQ/7 Supported
Will the new gskill set is a good match to my oczs?
What are the XMP profiles for the gskill set?
Any other suggestions?
What about voltages?
I am about to get this set
RAM G.SKILL F3-12800CL8T-12GBRM for my ASUS P6T mobo. The other set i have is an OCZ set with the following specs
[ DIMM1: OCZ OCZ3X1600LV2G ]
Memory Module Properties:
Module Name OCZ OCZ3X1600LV2G
Serial Number None
Module Size 2 GB (2 ranks, 8 banks)
Module Type Unbuffered DIMM
Memory Type DDR3 SDRAM
Memory Speed DDR3-1066 (533 MHz)
Module Width 64 bit
Module Voltage 1.5 V
Error Detection Method None
Refresh Rate Normal (7.8 us)
Memory Timings:
@ 533 MHz 8-7-7-16 (CL-RCD-RP-RAS) / 27-59-4-8-4-4-16 (RC-RFC-RRD-WR-WTR-RTP-FAW)
@ 533 MHz 7-7-7-16 (CL-RCD-RP-RAS) / 27-59-4-8-4-4-16 (RC-RFC-RRD-WR-WTR-RTP-FAW)
@ 457 MHz 6-6-6-14 (CL-RCD-RP-RAS) / 23-51-4-7-4-4-14 (RC-RFC-RRD-WR-WTR-RTP-FAW)
@ 380 MHz 5-5-5-12 (CL-RCD-RP-RAS) / 19-42-3-6-3-3-12 (RC-RFC-RRD-WR-WTR-RTP-FAW)
Extreme Memory Profile v1.2:
Profile Name Enthusiast (Certified)
Memory Speed DDR3-1600 (800 MHz)
Voltage 1.65 V (Memory Controller: 1.40 V)
Refresh Period (tREF) 7.9 us
Recommended DIMMs Per Channel 1
@ 800 MHz 8-8-8-24 (CL-RCD-RP-RAS) / 36-72-0-5-12-6-6-24-8 (RC-RFC-CR-RRD-WR-WTR-RTP-FAW-WCL)
@ 700 MHz 7-7-7-21 (CL-RCD-RP-RAS) / 32-63-0-5-11-6-6-21-7 (RC-RFC-CR-RRD-WR-WTR-RTP-FAW-WCL)
@ 600 MHz 6-6-6-18 (CL-RCD-RP-RAS) / 27-54-0-4-9-5-5-18-6 (RC-RFC-CR-RRD-WR-WTR-RTP-FAW-WCL)
Extreme Memory Profile v1.2:
Profile Name Extreme
Memory Speed DDR3-1700 (850 MHz)
Voltage 1.65 V (Memory Controller: 1.40 V)
Refresh Period (tREF) 7.9 us
Recommended DIMMs Per Channel 1
@ 875 MHz 9-9-9-27 (CL-RCD-RP-RAS) / 40-79-0-6-14-7-7-27-8 (RC-RFC-CR-RRD-WR-WTR-RTP-FAW-WCL)
@ 777 MHz 8-8-8-24 (CL-RCD-RP-RAS) / 35-70-0-5-12-6-6-24-8 (RC-RFC-CR-RRD-WR-WTR-RTP-FAW-WCL)
@ 680 MHz 7-7-7-21 (CL-RCD-RP-RAS) / 31-62-0-5-11-6-6-21-7 (RC-RFC-CR-RRD-WR-WTR-RTP-FAW-WCL)
@ 583 MHz 6-6-6-18 (CL-RCD-RP-RAS) / 27-53-0-4-9-5-5-18-6 (RC-RFC-CR-RRD-WR-WTR-RTP-FAW-WCL)
Memory Module Features:
Auto Self Refresh (ASR) Supported
DLL-Off Mode Not Supported
Extended Temperature Range Not Supported
Extended Temperature 1X Refresh Rate Not Supported
On-Die Thermal Sensor Readout (ODTS) Not Supported
Partial Array Self Refresh (PASR) Not Supported
RZQ/6 Supported
RZQ/7 Supported
Will the new gskill set is a good match to my oczs?
What are the XMP profiles for the gskill set?
Any other suggestions?
What about voltages?
Comment