Is this set suitable for my RIG?

[cdrov]

Hi there, nice to be here.

I am about to get this set

RAM G.SKILL F3-12800CL8T-12GBRM for my ASUS P6T mobo. The other set i have is an OCZ set with the following specs


[ DIMM1: OCZ OCZ3X1600LV2G ]

Memory Module Properties:
Module Name OCZ OCZ3X1600LV2G
Serial Number None
Module Size 2 GB (2 ranks, 8 banks)
Module Type Unbuffered DIMM
Memory Type DDR3 SDRAM
Memory Speed DDR3-1066 (533 MHz)
Module Width 64 bit
Module Voltage 1.5 V
Error Detection Method None
Refresh Rate Normal (7.8 us)

Memory Timings:
@ 533 MHz 8-7-7-16 (CL-RCD-RP-RAS) / 27-59-4-8-4-4-16 (RC-RFC-RRD-WR-WTR-RTP-FAW)
@ 533 MHz 7-7-7-16 (CL-RCD-RP-RAS) / 27-59-4-8-4-4-16 (RC-RFC-RRD-WR-WTR-RTP-FAW)
@ 457 MHz 6-6-6-14 (CL-RCD-RP-RAS) / 23-51-4-7-4-4-14 (RC-RFC-RRD-WR-WTR-RTP-FAW)
@ 380 MHz 5-5-5-12 (CL-RCD-RP-RAS) / 19-42-3-6-3-3-12 (RC-RFC-RRD-WR-WTR-RTP-FAW)

Extreme Memory Profile v1.2:
Profile Name Enthusiast (Certified)
Memory Speed DDR3-1600 (800 MHz)
Voltage 1.65 V (Memory Controller: 1.40 V)
Refresh Period (tREF) 7.9 us
Recommended DIMMs Per Channel 1
@ 800 MHz 8-8-8-24 (CL-RCD-RP-RAS) / 36-72-0-5-12-6-6-24-8 (RC-RFC-CR-RRD-WR-WTR-RTP-FAW-WCL)
@ 700 MHz 7-7-7-21 (CL-RCD-RP-RAS) / 32-63-0-5-11-6-6-21-7 (RC-RFC-CR-RRD-WR-WTR-RTP-FAW-WCL)
@ 600 MHz 6-6-6-18 (CL-RCD-RP-RAS) / 27-54-0-4-9-5-5-18-6 (RC-RFC-CR-RRD-WR-WTR-RTP-FAW-WCL)

Extreme Memory Profile v1.2:
Profile Name Extreme
Memory Speed DDR3-1700 (850 MHz)
Voltage 1.65 V (Memory Controller: 1.40 V)
Refresh Period (tREF) 7.9 us
Recommended DIMMs Per Channel 1
@ 875 MHz 9-9-9-27 (CL-RCD-RP-RAS) / 40-79-0-6-14-7-7-27-8 (RC-RFC-CR-RRD-WR-WTR-RTP-FAW-WCL)
@ 777 MHz 8-8-8-24 (CL-RCD-RP-RAS) / 35-70-0-5-12-6-6-24-8 (RC-RFC-CR-RRD-WR-WTR-RTP-FAW-WCL)
@ 680 MHz 7-7-7-21 (CL-RCD-RP-RAS) / 31-62-0-5-11-6-6-21-7 (RC-RFC-CR-RRD-WR-WTR-RTP-FAW-WCL)
@ 583 MHz 6-6-6-18 (CL-RCD-RP-RAS) / 27-53-0-4-9-5-5-18-6 (RC-RFC-CR-RRD-WR-WTR-RTP-FAW-WCL)

Memory Module Features:
Auto Self Refresh (ASR) Supported
DLL-Off Mode Not Supported
Extended Temperature Range Not Supported
Extended Temperature 1X Refresh Rate Not Supported
On-Die Thermal Sensor Readout (ODTS) Not Supported
Partial Array Self Refresh (PASR) Not Supported
RZQ/6 Supported
RZQ/7 Supported


Will the new gskill set is a good match to my oczs?

What are the XMP profiles for the gskill set?

Any other suggestions?
What about voltages?

[GSKILL TECH]

Only way to know is to test.

[cdrov]

What are the equivalent results from the diuretic set of gskills?

[HARDCORE GAMES™]

looks like your OCZ memory is rather old, the new revisions to JEDEC have moved faster speeds from XMS to the mainstream standard

Given your older memory has JEDEC to DDR3-1066, any more recent memory will operate at that speed.

I doubt any modern box will be able to mix XMS with JEDEC easily if at all