Announcement

Collapse

UNDER CONSTRUCTION: G.Skill Forum

Hello Everyone

The G.Skill Technical forum will be under construction during the month of February. There may be random down time, so we sincerely appreciate your patience and cooperation during this time. We are excited to bring you a more interactive forum to share information. For any technical assistance or issue that may require more attention, please contact us directly via other methods such as email, telephone, social media, NewEgg Chat, and more. Support is available through any avenue you can reach us.

ustech@gskillusa.com
techsupport@gskill.com


We hope for a quick and smooth transition

Thank you for your understanding

GSKILL SUPPORT
See more
See less

F2-8500CL5D-4GBPK + GIGABYTE GA-MA770-UD3P BIOS settings

Collapse
This is a sticky topic.
X
X
  • Filter
  • Time
  • Show
Clear All
new posts

  • F2-8500CL5D-4GBPK + GIGABYTE GA-MA770-UD3P BIOS settings

    These settings can be used for most DDR2-1066 memory packages on this motherboard.

    Make these changes in your BIOS:

    Set Memory Clock - Manual
    Memory Clock - x5.33 1066MHz
    DCTs Mode - Unganged

    System Voltage Control - Manual
    DRAM Voltage - 2.1V

    DRAM Configuration (submenu)
    CAS# Latency - 5
    RAS to CAS R/W Delay - 5
    Row Precharge Time - 5
    Minimum RAS Active Time - 15
    1T/2T Command Timing - 2
    TwTr Command Delay - 4
    Trfc 0 for DIMM1 - 127
    Trfc 2 for DIMM2 - 127
    Trfc1 for DIMM3 - 127
    Trfc3 for DIMM4 - 127

    Write Recovery Time - 8
    Precharge Time - 4
    Row Cycle Time - 27
    RAS to RAS Delay - 4

    Save and exit.

    Thank you
    GSKILL SUPPORT
    Are you an overclocker? Have screen shots of your OC results? Please post and share your OC experience!

    The new G.Skill Overclocking Section!

    http://www.gskill.us/forum/forumdisplay.php?f=43

  • #2
    Hi. how do I set this motherboard and this ram for 4 x 2 gb sticks? (8gb) Thank you.

    Comment


    • #3
      Try this:

      Set Memory Clock - Manual
      Memory Clock - x4.00 800MHz
      DCTs Mode - Unganged

      System Voltage Control - Manual
      DRAM Voltage - 2.0V

      DRAM Configuration (submenu)
      CAS# Latency - 4
      RAS to CAS R/W Delay - 4
      Row Precharge Time - 4
      Minimum RAS Active Time - 12
      1T/2T Command Timing - 2
      TwTr Command Delay - 4
      Trfc 0 for DIMM1 - 160
      Trfc 2 for DIMM2 - 160
      Trfc1 for DIMM3 - 160
      Trfc3 for DIMM4 - 160

      Write Recovery Time - 8 (you can also try 6 to see if the system can support it)
      Precharge Time - 4
      Row Cycle Time - 27
      RAS to RAS Delay - 4

      Let me know how that goes.
      Are you an overclocker? Have screen shots of your OC results? Please post and share your OC experience!

      The new G.Skill Overclocking Section!

      http://www.gskill.us/forum/forumdisplay.php?f=43

      Comment


      • #4
        Thank you again. its working but some of the values don't go exactly where you said. I noticed my motherboard model number doesn't have the P at the end of it and it's V2.0, I don't know if that's why.

        this is the closest I could get the values to what you said.

        Comment


        • #5
          Looks pretty good. Is the system stable?
          Are you an overclocker? Have screen shots of your OC results? Please post and share your OC experience!

          The new G.Skill Overclocking Section!

          http://www.gskill.us/forum/forumdisplay.php?f=43

          Comment


          • #6
            Yes it has been stable so far. thank you again very much

            Comment

            Working...
            X