Announcement

Collapse
No announcement yet.

F2-8500CL5D-4GBPK + ASUS M4N82 Deluxe BIOS settings

Collapse
This is a sticky topic.
X
X
  • Filter
  • Time
  • Show
Clear All
new posts

  • F2-8500CL5D-4GBPK + ASUS M4N82 Deluxe BIOS settings

    AI Overclocking - Manual
    DRAM Frequency Control - Manual
    DRAM Frequency - 1066

    Memory Configuration (submenu)
    DCT Unganged Mode - Enabled
    Power Down Enable - Disabled

    DRAM Timing Configuration (submenu)
    DRAM Command Rate - 2
    DRAM Timing Mode - Both
    DCT0:
    TCL - 5 CLK
    TRCD - 5 CLK
    TRP - 5 CLK
    TRTP - 5 CLK
    TRAS - 15 CLK
    TRC - 31 CLK (may need to increase up to 42 for 8GB)
    TWR - 8 CLK
    TRRD - 4 CLK

    TWTR - 4 CLK
    TRFC0 - 127.5 (195 for 8GB, 4 sticks)
    TRFC1 - 75 (127.5 for 8GB, 4 sticks)

    DCT1:
    Enter same values as above if using these slots, or if operating full slots.

    DRAM Voltage - 2.1V
    HT Voltage - 1.3V
    CPU-NB Voltage - 1.2V (1.4V for 8GB, 4 sticks)

    Thank you
    GSKILL SUPPORT
    Last edited by GSKILL TECH; 10-12-2010, 08:47 AM.
    Are you an overclocker? Have screen shots of your OC results? Please post and share your OC experience!

    The new G.Skill Overclocking Section!

    http://www.gskill.us/forum/forumdisplay.php?f=43

  • #2
    would not post

    i have tried these setting s with my mobo but there is no 42

    Comment


    • #3
      What CPU do you have? Have you tested both kits before putting them together?

      Thank you
      GSKILL TECH
      Are you an overclocker? Have screen shots of your OC results? Please post and share your OC experience!

      The new G.Skill Overclocking Section!

      http://www.gskill.us/forum/forumdisplay.php?f=43

      Comment


      • #4
        my processor is amd phenom 2 black edition x4 955 am3.

        and yes i did try the two 1 at a time

        Comment


        • #5
          I am assumimg both kits tested fine seperately? Do you have the latest BIOS? Post your own thread so we can troubleshoot the problem.

          Thank you
          GSKILL TECH
          Are you an overclocker? Have screen shots of your OC results? Please post and share your OC experience!

          The new G.Skill Overclocking Section!

          http://www.gskill.us/forum/forumdisplay.php?f=43

          Comment


          • #6
            they tested at 800 mhz and yes i have the new bios

            Comment


            • #7
              Try each stick at DDR2-1066. Sounds like one piece of hardware may be defective, so we will need to troubleshoot it.

              Thank you
              GSKILL TECH
              Are you an overclocker? Have screen shots of your OC results? Please post and share your OC experience!

              The new G.Skill Overclocking Section!

              http://www.gskill.us/forum/forumdisplay.php?f=43

              Comment

              Working...
              X