F2-8000CL5D-4GBPQ Bios help

[morst]

can you please give me the Bios set up for

Asus p5q pro turbo
Q955O CPU
8 gigs F2-8000CL5D-4GBPQ (4x2gig)

The problem is when i set the memory to run at 1000mhz. it will run fine at that speed but the next time i start up the PC the PC says that its overclocked and it will set the memory to default 800mhz.

[GSKILL TECH]

Try boosting NB Voltage or DRAM Voltage a little and see if that helps.

[morst]

memory voltage

i tried higher volts with no luck. then i tried lowering memory from 2.1 volts to 2.0 so far i'm one day in and looking good,i will keep you posted.

[cuthead]

Memory Timing is important,without it bios crash,high voltage is important,GTL is important
so I set
CPU Clock Ratio...........................9 x
CPU Clock.................................445 MHz

Voltage Setting Page
CPU VID Special Add.......................+250mV
DRAM Voltage Control......................2.290V
CPU GTL 0/2 REF Volt......................0.63X
CPU GTL 1/3 REF Volt......................0.61X
North Bridge GTL REF Volt …………….0.58X

CAS Latency Time (tCL)....................5
RAS# to CAS# Delay (tRCD)……………..6
RAS# Precharge (tRP)………………….6
Precharge Delay (tRAS)....................18
All Precharge to Act………………….7
REF to ACT Delay (tRFC)……………….77
pass cs:go 8 rounds,pass restart 8 rounds,and system stable.