Announcement

Collapse
No announcement yet.

TridentZ 3866 and X99: timings for 3200?

Collapse
X
  • Filter
  • Time
  • Show
Clear All
new posts

  • TridentZ 3866 and X99: timings for 3200?

    Hi!
    I knew when buying it that I would not be able to run at factory top speed. But I have a hard time finding the most stable timings.
    Mobo is Asus X99 Rampage V Edition 10.
    Ram is F4-3866C18Q-16GTZ.

    Intel base timings are based on 15-15-15-35 for 2133 Mhz
    XMP profile (just one!) is 18-22-22-42-2N for 3866 Mhz

    I have to find something in between, so I tried many, many timings and speeds, but can't find the perfect spot and I do not have a methodology or guide. Searching internet brings nothing.

    By the way, are all RAM sticks of the same "family" made of the same parts, so I could copy factory OC/XMP settings from a TridentZ 3200? This speed is my goal...

    Thank you a lot! I have been fighting for months...

  • #2
    Yes, you can try the 3200 XMP and see how that works. The higher frequency kit is capable of better so typically a lower frequency spec will be fine.

    Also, do you have the latest BIOS/EFI for the motherboard?
    Are you an overclocker? Have screen shots of your OC results? Please post and share your OC experience!

    The new G.Skill Overclocking Section!

    http://www.gskill.us/forum/forumdisplay.php?f=43

    Comment


    • #3
      i have latest 1502 bios from Asus. I am now running RAM at 3400 Mhz!! Thanks a lot for the inspiration!

      my build and Aida results: https://www.techpowerup.com/forums/t.../#post-3594059

      Comment


      • #4
        Very awesome build! Would be great for people to see in our Members section:

        http://www.gskill.us/forum/forumdisplay.php?f=52

        Glad to hear you got everything working well. BIOS update can do wonders
        Are you an overclocker? Have screen shots of your OC results? Please post and share your OC experience!

        The new G.Skill Overclocking Section!

        http://www.gskill.us/forum/forumdisplay.php?f=43

        Comment

        Working...
        X