Announcement

Collapse

UNDER CONSTRUCTION: G.Skill Forum

Hello Everyone

The G.Skill Technical forum will be under construction during the month of February. There may be random down time, so we sincerely appreciate your patience and cooperation during this time. We are excited to bring you a more interactive forum to share information. For any technical assistance or issue that may require more attention, please contact us directly via other methods such as email, telephone, social media, NewEgg Chat, and more. Support is available through any avenue you can reach us.

ustech@gskillusa.com
techsupport@gskill.com


We hope for a quick and smooth transition

Thank you for your understanding

GSKILL SUPPORT
See more
See less

Just upgraded from 1333 to 2400, any advice on timings?

Collapse
X
  • Filter
  • Time
  • Show
Clear All
new posts

  • Just upgraded from 1333 to 2400, any advice on timings?





    It wont post on 2400
    It does on 2133.
    Can I get the timing tighter?
    Its F3-2400C10D-16GTX

    thanks
    ASUS Sabertooth 990FX AMD FX-8350 Zalman 9900NT G.Skill F3-2400C10D-16GTX 16GB XFX Double D R9-280X-TDFD 3GB 384Bit GDDR5 HT Omega Claro Plus Windows 7 Ultimate 64bit SP1 DSL 25/2.5Mbps APC Back UPS XS1000

  • #2
    got 9-11-11-31 and bumped up the nb to2400
    Should I keep it at 1.65v?
    ASUS Sabertooth 990FX AMD FX-8350 Zalman 9900NT G.Skill F3-2400C10D-16GTX 16GB XFX Double D R9-280X-TDFD 3GB 384Bit GDDR5 HT Omega Claro Plus Windows 7 Ultimate 64bit SP1 DSL 25/2.5Mbps APC Back UPS XS1000

    Comment


    • #3
      Good work! Those performance numbers are much improved.

      You can try 1.60V to see if it is stable.

      What is your CPU-NB Voltage? May need to be higher to stabilize DDR3-2400
      Are you an overclocker? Have screen shots of your OC results? Please post and share your OC experience!

      The new G.Skill Overclocking Section!

      http://www.gskill.us/forum/forumdisplay.php?f=43

      Comment


      • #4
        thanks
        MY cpu/nb is up .1
        I'm not worried about it, I only paid $10 over the F3-2133C9D-16GXH I was gonna get.
        I'm thinking tighter timings would help at 2133
        Look at the difference from the 1090t...lol
        I notice the write speed on the l1, l2 and l3 cache was alot higher on the 1090 though
        the l1 on the 1090 is almost 4 times better even on copy its twice the mb's
        that kinda sucks


        Last edited by Cartel; 02-08-2017, 06:19 PM.
        ASUS Sabertooth 990FX AMD FX-8350 Zalman 9900NT G.Skill F3-2400C10D-16GTX 16GB XFX Double D R9-280X-TDFD 3GB 384Bit GDDR5 HT Omega Claro Plus Windows 7 Ultimate 64bit SP1 DSL 25/2.5Mbps APC Back UPS XS1000

        Comment


        • #5
          I tried 10-10-10-31 and 9-10-11-31 @2133 and it was giving errrors in memtest.
          Its gonna be 9-11-11-31 I guess.
          ASUS Sabertooth 990FX AMD FX-8350 Zalman 9900NT G.Skill F3-2400C10D-16GTX 16GB XFX Double D R9-280X-TDFD 3GB 384Bit GDDR5 HT Omega Claro Plus Windows 7 Ultimate 64bit SP1 DSL 25/2.5Mbps APC Back UPS XS1000

          Comment


          • #6
            You could also try 9-11-10-21 but would probably see bigger performance gains from tweaking the secondary timings at this point.
            >> The official G.SKILL Memory Frequently Asked Questions (F.A.Q.)! << | [pictures] Show off your G.SKILL products!

            Comment


            • #7
              OK anything you see that I can do?
              thanks
              Attached Files
              ASUS Sabertooth 990FX AMD FX-8350 Zalman 9900NT G.Skill F3-2400C10D-16GTX 16GB XFX Double D R9-280X-TDFD 3GB 384Bit GDDR5 HT Omega Claro Plus Windows 7 Ultimate 64bit SP1 DSL 25/2.5Mbps APC Back UPS XS1000

              Comment


              • #8
                I never had a AM3+ system myself, the closest thing would have been FM2 with a Gigabyte MB, 2x2GB and 2x4GB kits, so you are probably better off asking someone else :/

                Edit: However i could fire up my FM2 setup next week and make some screenshots at DDR3-2133 CL9 for you, if you'd like?
                >> The official G.SKILL Memory Frequently Asked Questions (F.A.Q.)! << | [pictures] Show off your G.SKILL products!

                Comment

                Working...
                X