G.Skill Trident Z RGB XMP fail.

[GSKILL TECH]

Yes, ask the RMA dept. to keep the other half of your kit so you can maintain a matching set.

[jimaxe]

RMA question

Given that I have to RMA all 4 modules, which would leave me computerless, can I RMA 2 at a time? so Ive always got a working PC

[GSKILL TECH]

Send them in to see if a new kit works better:

http://www.gskill.com/en/rma

Have you tried 2 or 3 modules to see if it can do 3200?

[jimaxe]

Ok I tested it with just 1 stick in at a time.

XMP was enabled in bios. Booted. Checked Bios. Ram reading 3000mhz.

Tested each stick individually with no problems.

Feeling optimistic, I put them all back in and Bam, not booting again.



PS latest bios etc installed.

[GSKILL TECH]

Do you have the latest BIOS?

Test one at a time to see if each can pass XMP

[jimaxe]

Hey guys, I have a Intel Core i7 7700K , ASUS ROG Strix Z270F Gaming Motherboard
G.Skill Trident Z RGB F4-3000C15Q-32GTZR 32GB (4x8GB) DDR4 ram.

Ever since day 1, whenever I enable XMP the PC doesnt boot. I have to manually turn it off then the bios prompts me to enter.

all my components support xmp. Any idea why its failing?