Announcement

Collapse

UNDER CONSTRUCTION: G.Skill Forum

Hello Everyone

The G.Skill Technical forum will be under construction during the month of February. There may be random down time, so we sincerely appreciate your patience and cooperation during this time. We are excited to bring you a more interactive forum to share information. For any technical assistance or issue that may require more attention, please contact us directly via other methods such as email, telephone, social media, NewEgg Chat, and more. Support is available through any avenue you can reach us.

ustech@gskillusa.com
techsupport@gskill.com


We hope for a quick and smooth transition

Thank you for your understanding

GSKILL SUPPORT
See more
See less

G.Skill Trident Z RGB XMP fail.

Collapse
X
  • Filter
  • Time
  • Show
Clear All
new posts

  • G.Skill Trident Z RGB XMP fail.

    Hey guys, I have a Intel Core i7 7700K , ASUS ROG Strix Z270F Gaming Motherboard
    G.Skill Trident Z RGB F4-3000C15Q-32GTZR 32GB (4x8GB) DDR4 ram.

    Ever since day 1, whenever I enable XMP the PC doesnt boot. I have to manually turn it off then the bios prompts me to enter.

    all my components support xmp. Any idea why its failing?

  • #2
    Do you have the latest BIOS?

    Test one at a time to see if each can pass XMP
    Are you an overclocker? Have screen shots of your OC results? Please post and share your OC experience!

    The new G.Skill Overclocking Section!

    http://www.gskill.us/forum/forumdisplay.php?f=43

    Comment


    • #3
      Ok I tested it with just 1 stick in at a time.

      XMP was enabled in bios. Booted. Checked Bios. Ram reading 3000mhz.

      Tested each stick individually with no problems.

      Feeling optimistic, I put them all back in and Bam, not booting again.



      PS latest bios etc installed.

      Comment


      • #4
        Send them in to see if a new kit works better:

        http://www.gskill.com/en/rma

        Have you tried 2 or 3 modules to see if it can do 3200?
        Are you an overclocker? Have screen shots of your OC results? Please post and share your OC experience!

        The new G.Skill Overclocking Section!

        http://www.gskill.us/forum/forumdisplay.php?f=43

        Comment


        • #5
          RMA question

          Given that I have to RMA all 4 modules, which would leave me computerless, can I RMA 2 at a time? so Ive always got a working PC

          Comment


          • #6
            Yes, ask the RMA dept. to keep the other half of your kit so you can maintain a matching set.
            Are you an overclocker? Have screen shots of your OC results? Please post and share your OC experience!

            The new G.Skill Overclocking Section!

            http://www.gskill.us/forum/forumdisplay.php?f=43

            Comment

            Working...
            X