Announcement

Collapse
No announcement yet.

G.Skill Trident Z RGB XMP fail.

Collapse
X
  • Filter
  • Time
  • Show
Clear All
new posts

  • G.Skill Trident Z RGB XMP fail.

    Hey guys, I have a Intel Core i7 7700K , ASUS ROG Strix Z270F Gaming Motherboard
    G.Skill Trident Z RGB F4-3000C15Q-32GTZR 32GB (4x8GB) DDR4 ram.

    Ever since day 1, whenever I enable XMP the PC doesnt boot. I have to manually turn it off then the bios prompts me to enter.

    all my components support xmp. Any idea why its failing?

  • #2
    Do you have the latest BIOS?

    Test one at a time to see if each can pass XMP

    Comment


    • #3
      Ok I tested it with just 1 stick in at a time.

      XMP was enabled in bios. Booted. Checked Bios. Ram reading 3000mhz.

      Tested each stick individually with no problems.

      Feeling optimistic, I put them all back in and Bam, not booting again.



      PS latest bios etc installed.

      Comment


      • #4
        Send them in to see if a new kit works better:

        http://www.gskill.com/en/rma

        Have you tried 2 or 3 modules to see if it can do 3200?

        Comment


        • #5
          RMA question

          Given that I have to RMA all 4 modules, which would leave me computerless, can I RMA 2 at a time? so Ive always got a working PC

          Comment


          • #6
            Yes, ask the RMA dept. to keep the other half of your kit so you can maintain a matching set.

            Comment

            Working...
            X