Announcement

Collapse
No announcement yet.

G.Skill Trident Z RGB XMP fail.

Collapse
X
  • Filter
  • Time
  • Show
Clear All
new posts

  • G.Skill Trident Z RGB XMP fail.

    Hey guys, I have a Intel Core i7 7700K , ASUS ROG Strix Z270F Gaming Motherboard
    G.Skill Trident Z RGB F4-3000C15Q-32GTZR 32GB (4x8GB) DDR4 ram.

    Ever since day 1, whenever I enable XMP the PC doesnt boot. I have to manually turn it off then the bios prompts me to enter.

    all my components support xmp. Any idea why its failing?

  • #2
    Do you have the latest BIOS?

    Test one at a time to see if each can pass XMP
    Are you an overclocker? Have screen shots of your OC results? Please post and share your OC experience!

    The new G.Skill Overclocking Section!

    http://www.gskill.us/forum/forumdisplay.php?f=43

    Comment


    • #3
      Ok I tested it with just 1 stick in at a time.

      XMP was enabled in bios. Booted. Checked Bios. Ram reading 3000mhz.

      Tested each stick individually with no problems.

      Feeling optimistic, I put them all back in and Bam, not booting again.



      PS latest bios etc installed.

      Comment


      • #4
        Send them in to see if a new kit works better:

        http://www.gskill.com/en/rma

        Have you tried 2 or 3 modules to see if it can do 3200?
        Are you an overclocker? Have screen shots of your OC results? Please post and share your OC experience!

        The new G.Skill Overclocking Section!

        http://www.gskill.us/forum/forumdisplay.php?f=43

        Comment


        • #5
          RMA question

          Given that I have to RMA all 4 modules, which would leave me computerless, can I RMA 2 at a time? so Ive always got a working PC

          Comment


          • #6
            Yes, ask the RMA dept. to keep the other half of your kit so you can maintain a matching set.
            Are you an overclocker? Have screen shots of your OC results? Please post and share your OC experience!

            The new G.Skill Overclocking Section!

            http://www.gskill.us/forum/forumdisplay.php?f=43

            Comment

            Working...
            X