help with f316000 on assassin

[cinder]

Hi, i want you?r help because i can?t make these memorys work at 2000 mhz.
wen i activate the "profile1" the mobo restart a few times then shows a pop up msg in post "voltage bios error".
This is mi config:
Cpu: i7 950
mem: gskill trident f31600 3x2
Powersupply:Antec EA-650 Green 650W 80 plus
mother: gigabyte assassin

Can post here a config tips or config specs for this mother? (for a noob of course) i really apreciate it.
thanks in advance and sorry for my english.(not a native english speaker)

[Tradesman]

First thing would be to check and make sure you have the latest BIOS. If you already have it will have to set up the sticks manually.

[GSKILL TECH]

Don't forget, you must raise the QPI/VTT Core Voltage to stabilize DDR3-2000

Thank you
GSKILL TECH

[cinder]

thanks and listening

Ok thanks for the help, and yes i have the bios up to date(f5d version) and tell me the qpi setings (and any others pls) i don't want to pulverize my mother. Thank you again see ya

[RamJam]

The qpi/vtt is your memory controller voltage, probably would be best to just raise it a little at a time adding .01 or .02 at a time