Hello, I was wondering if someone had some experience and could provide me with the complete optimal timings for these chips? I'm looking to tighten up the timings as much as I can, any suggestions would be greatly appreciated.
Model Brand G.SKILL Model F2-6400CL4D-4GBPK Type 240-Pin DDR2 SDRAM Tech Spec Capacity 4GB (2 x 2GB) Speed DDR2 800 (PC2 6400) Cas Latency 4 Timing 4-4-4-12 Voltage 2.0V - 2.1V
I have the ASUS Crosshair mobo
XP x64 Pro
AMD x4 9600 Phenom Black Edition
Current OC settings:
Core: 2.61
Multi: 11.5
Bus: 227
HT: 1135
Memory:
Volt: 2.1
Freq: 454
FSB: 1:2
CL: 5
tRCD: 5
tRP: 5
tRAS: 15
tRC: 25
CR: 2T
Thanks much,
Nick
Model Brand G.SKILL Model F2-6400CL4D-4GBPK Type 240-Pin DDR2 SDRAM Tech Spec Capacity 4GB (2 x 2GB) Speed DDR2 800 (PC2 6400) Cas Latency 4 Timing 4-4-4-12 Voltage 2.0V - 2.1V
I have the ASUS Crosshair mobo
XP x64 Pro
AMD x4 9600 Phenom Black Edition
Current OC settings:
Core: 2.61
Multi: 11.5
Bus: 227
HT: 1135
Memory:
Volt: 2.1
Freq: 454
FSB: 1:2
CL: 5
tRCD: 5
tRP: 5
tRAS: 15
tRC: 25
CR: 2T
Thanks much,
Nick