F3-16000CL9 vtt 1.66 is it safe?

[bmwoo3333]

i set the 1.67@ram vtt@1.66 2000Mhz
is it safe?
its stable but just worry about the high volt
9-9-9-25-2t
thx

[Tradesman]

You haven't listed the actual model of the set you have (different models in the 2000 freq range cary in base DRAM voltage from 1.55 to 1.65), but should be OK, though with some models i.e. those w/ 1.55 base rating, I wouldn't take them much higher

[bmwoo3333]

here is model spec

Cas Latency: 9
Voltage: 1.6V
Multi-channel Kit: Triple Channel Kit
Timing: 9-9-9-24
Model #: F3-16000CL9T-6GBTDD

i7 920(Do) 4.2MHz
1. vcore 1.456v
2. 9-9-9-24-2t
4. QPI/VTT = 1.64v
5. PCIE = 1.60v
6. QPI PLL = 1.20v
7. IOH Core = 1.20v
8. ICH I/O = 1.60v
9. ICH Core = 1.20v
10. DRAM Voltage = 1.66v

QPI/VTT IS 1.64v and kinda scare i dont want to fry it so....
what is maximum for vtt voltage?
thx

[Tradesman]

My fault, saw the DRAM voltage didn't see the QPI/VTT you had shown, and NO I wouldn't want to run it that high, Even 1.4 is on the high side

[bmwoo3333]

ah oki
that mean is i cant use 2000mhz 9-9-9-25
but when this thing is on 26k p67 there is no problem meh!
thx for info