Announcement

Collapse
No announcement yet.

SSD Falcon can not detect

Collapse
X
Collapse
 
  • Page of 1
  • Filter
  • Time
  • Show
Clear All
new posts
Previous template Next
  • #1

    SSD Falcon can not detect

    Yesterday, During I'm using WindowsXP... It's Freeze.. So, I reset my computer.
    SSD Falcon disappear!?!? can't detect. When I trid to put Jumper for update firmware, BIOS can detect "YATAPDONG BAREFOOT-ROM". how can i do now? update firmware?
    Tags: None
  • #2
    If its a laptop take your SSD out of your laptop, take the battery out of your laptop and ten minutes latter push down the power button for 30 seconds. This will reset your bios in your laptop and should fix the freeze, reinstall your SSD and start with the fresh install again. Also if you have an external 2.5 drive enclosure you can do a reformat on your SSD and that sometimes helps.
    CPU I7-980X @ 3.81Ghz
    MB ASUS P6X58D-E
    GPU GTX480 @ 770Mhz
    RAM 12Gb Patriot Viper Xtreme Division-2 DDR3 @ 1908Mhz
    PSU Corsair AX 850W
    SSD: Intel X25M 80Gb
    HD 2x WD VelociRaptors 150Gb in Raid-0

    Sager NP8662
    CPU: Intel Q9100 @ 2.38 GHz
    GPU: GTX 260M @ 612Mhz
    RAM: G.Skill DDR3 1066Mhz 4Gb
    SSD: Intel X25M 120Gb

    Comment

    • #3
      Originally posted by NoomSCOM View Post
      Yesterday, During I'm using WindowsXP... It's Freeze.. So, I reset my computer.
      SSD Falcon disappear!?!? can't detect. When I trid to put Jumper for update firmware, BIOS can detect "YATAPDONG BAREFOOT-ROM". how can i do now? update firmware?
      it seemed it is defective
      please return it to your local reseller if you didn't buy it for a long time
      or you could directly RMA with us by sending RMA request to rma@gskill.com
      sorry for the inconvenience



      G.S

      Comment

      Previous template Next
      Working...
      X