Tweet
Support,
Could you please advise what the stable configuration for this memory
Memory: F3-10666CL9T-6GBNQ
Motherboard: GA-X58-DS4
CPU: Intel Core i7 920
Problem: Windows Vista 64bit is freezing at random times, completely unresponsive. Ive updated all the drivers, etc. This is a clean install of Vista 64bit SP1. I have not overclocked at all, everything at stock settings.
-RAM was autodetecting in BIOS to 1066Mhz, I manually set it to 1333Mhz.
-Tried manually set timings to 9-9-9-24 and Command Rate of 1T running at auto voltage of 1.5v
-Ive also run Memtest86, no errors found.
I have now changed Command Rate to 2T, (Still at 1.5v) and downgraded Nvidia Graphics Drivers to more stable version. So far my system seems more stable, im currently monitoring the fault. No freezing so far.
At this stage, im convinced either changing Command Rate to 2T , OR downgrading Nvidia Driver has perhaps fixed this is issue.
This is why I want you to please comment, on what your recommended settings for this memory/board/cpu combination.
Should I be increasing voltage to 1.6v for 9-9-9-24 timings?
Does this RAM supposed work well on 1T?
What was your test setup config, as G.Skill website says this motherboard is tested ok.
Thanks!!
CLoSeR
Could you please advise what the stable configuration for this memory
Memory: F3-10666CL9T-6GBNQ
Motherboard: GA-X58-DS4
CPU: Intel Core i7 920
Problem: Windows Vista 64bit is freezing at random times, completely unresponsive. Ive updated all the drivers, etc. This is a clean install of Vista 64bit SP1. I have not overclocked at all, everything at stock settings.
-RAM was autodetecting in BIOS to 1066Mhz, I manually set it to 1333Mhz.
-Tried manually set timings to 9-9-9-24 and Command Rate of 1T running at auto voltage of 1.5v
-Ive also run Memtest86, no errors found.
I have now changed Command Rate to 2T, (Still at 1.5v) and downgraded Nvidia Graphics Drivers to more stable version. So far my system seems more stable, im currently monitoring the fault. No freezing so far.
At this stage, im convinced either changing Command Rate to 2T , OR downgrading Nvidia Driver has perhaps fixed this is issue.
This is why I want you to please comment, on what your recommended settings for this memory/board/cpu combination.
Should I be increasing voltage to 1.6v for 9-9-9-24 timings?
Does this RAM supposed work well on 1T?
What was your test setup config, as G.Skill website says this motherboard is tested ok.
Thanks!!
CLoSeR
Comment