F3-10666CL9T-6GBNQ / Rampage II Extreme

[RamUser]

1. What are the minimum/maximum/optimum ram timing settings for this ram?

With Everest I've seen read throughputs of up to 14GB/s overclocked.

Underclocked is about 8.7 GB/s. What are the minimum settings when underclocking?

System
i7 920
Rampage II Extreme
12 GB G.SKILL Memory
Seagate 7200.11 1.5 TB Drive
ASUS EAH 4870 512mb
Thermaltake Armour 8000B Case

Lastly, is there anywhere I can view the real technical documents for the chips themselves?

[RamUser]

More..

Ok, so here I am doing my homework on DDR3 Ram.

JEDEC standard modules

Standard name
DDR3-1066

Memory clock Cycle time
133 MHz

Cycle time
7.5 ns

I/O Bus clock
533 MHz

Data transfers per second
1066 Million

Module name
PC3-8500

Peak transfer rate
8533 MB/s

================

DDR3-1333
166 MHz
6 ns
667 MHz
1333 Million
PC3-10600
10667 MB/s[1]
===================

So I should be getting somewhere between 8533 and 10667 MB/s according to Jedec standard.

Everest gives me these possible timings:

9-9-9-24 @ 666 MHz
8-8-8-22 @ 592 MHz
7-7-7-19 @ 518 MHz
6-6-6-16 @ 444 MHz

[RamUser]

More 2

When my motherboard is left on [AUTO] settings it defaults to:

8-8-8-20

with
59-8-6-16-0

2nd info 2N-54-56-57

3rd Info 5-5-14-10-10-10-7-6-7-7-4

Dram Bus Voltage: Auto

min 1.51106V
max 2.50492V

Current 1.488 --> 1.51 (roughly)

There is a memory up feature which allows me to automatically choose:
DDR3-1600
DDR3-1800
DDR3-2000

Dram Frequency (For Locked CPU DDR3-800 and DDR3-1066 Can Work only)

QPI Link can be set..
4800 MT/s
5866 MT/s
6400 MT/s

[G.SKILL]

sorry....
we're not sure about your question

for this model, it could run fine at our rated speed with default settings
or you could set it DDR3 1333 9-9-9-24 2N @1.5v manually in BIOS
as for how much it could be overclocked, we can't guarantee for that
thanks


G.S