MY PC spec:
CPU: AMD Phenom 9350e
Motherboard: Foxconn A7GM-S (w/ latest bios)
Memory: F2-8500CL5D (2 packs)
OS: Vista 64 bit
Dear G.skill,
I bought 2packs of G.SKILL DDR2 PC2 8500 4GB kit (F2-8500CL5D-4GBPK) months ago.
This ram works prefect (0 error on 12hr memtest) when it's on 800Mhz.
But I bought this because it support 1066Mhz, and now I'm stuck w/ configuration.
At first, my foxconn board catch the memory latency 5-7-7-20 if AUTO selected.
So I tried to set the values on manual mode.
1. I increased NB to 1.48v (max. val on my board)
2. set 2.1v for memory.
3. set 5-5-5-15 for dram timing
And here's a weird thing happened... even if I set 5-5-5-15 manually the tCL stuck on 6,
so I get 6-5-5-15.
Also it gets me 6-7-7-20 with manual setting if I made same set as Auto( 5-7-7-20).
And the result, it kept fail on memtest
(FYI, I also run the test w/ CAS 6-6-6-18, 7-7-7-18 and only get few drops of errors...)
I spent my precious holiday weekend on this thing please help (Y_Y)
I'm looking forward to hear your answer.
Thank you.
ps: this board support tRFC up to val 42...
CPU: AMD Phenom 9350e
Motherboard: Foxconn A7GM-S (w/ latest bios)
Memory: F2-8500CL5D (2 packs)
OS: Vista 64 bit
Dear G.skill,
I bought 2packs of G.SKILL DDR2 PC2 8500 4GB kit (F2-8500CL5D-4GBPK) months ago.
This ram works prefect (0 error on 12hr memtest) when it's on 800Mhz.
But I bought this because it support 1066Mhz, and now I'm stuck w/ configuration.
At first, my foxconn board catch the memory latency 5-7-7-20 if AUTO selected.
So I tried to set the values on manual mode.
1. I increased NB to 1.48v (max. val on my board)
2. set 2.1v for memory.
3. set 5-5-5-15 for dram timing
And here's a weird thing happened... even if I set 5-5-5-15 manually the tCL stuck on 6,
so I get 6-5-5-15.
Also it gets me 6-7-7-20 with manual setting if I made same set as Auto( 5-7-7-20).
And the result, it kept fail on memtest
(FYI, I also run the test w/ CAS 6-6-6-18, 7-7-7-18 and only get few drops of errors...)
I spent my precious holiday weekend on this thing please help (Y_Y)
I'm looking forward to hear your answer.
Thank you.
ps: this board support tRFC up to val 42...
Comment