Announcement

Collapse
No announcement yet.

Ram problem with GA-G33M-DS2R

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Ram problem with GA-G33M-DS2R

    I have this Ram?s :

    http://www.compuland.de/product_info...00MHz-CL4.html

    on my GIGABYTE GA-G33M-DS2R (F7 Bios)
    DDR2 Voltage:normal

    If I use the Ram in Dual channel the pc is freezing by memtest
    If I use the Ram in single mode the pc freezing too by memtest 86+.
    If I put +0.2v. the Ram works in single mode but not in dual channel,because if i test the Ram with memtest the pc is freezing after a few minitus.

    Are this Ram?s Inkompatible or what i have to do ?

    System:

    Netzteil :Bequiet straingh Power 550 Watt
    CPU :E8400
    Grafikkarte:HD4850
    Last edited by metz; 08-19-2008, 07:26 AM.

  • #2
    could you test one stick at the time? thanks

    Comment


    • #3
      When I use one of them the pc is not freezing by the normale voltage.
      I tested both of them alone and the pc is not freezing by memtest.

      But if I start Jack Keane the PC is freezing.
      I had changed the ram because I thought that they are defekt,but now i cant start jack Keane with one of them(memtest works),before i changed the ram it works good.(If i have luck the game starts)

      I wish i dont had changed the ram because before i did that it works with one of them.
      But memtest shows no error if i test one of them.

      Is the Ram inkompatible?

      I dont want raise up the voltage by +0.3v. because i think its to high

      I thought the mainboard could be defekt but it all works before i changed the ram vs. the same ram. (Only if i used one of them)

      But dual channel never working
      Last edited by metz; 08-19-2008, 10:51 AM.

      Comment


      • #4
        since you were using HD 4850, remember to disable the integrated Intel graphics
        or it would use some of your memory to graphics



        G.S

        Comment


        • #5
          since you were using HD 4850, remember to disable the integrated Intel graphics
          or it would use some of your memory to graphics

          The Mainboard disable the integrated Intel graphics automatic if I use a PCIe Grafikkarte.

          If I don?t use the HD 4850 I get the same problem.

          Comment

          Working...
          X