E6750
GA-P35-DS3 (rev. 1.0)
G.SKILL 4096MB GBPK
ALBATRON 8800GTS 320MB
WD 640GB
WD 320GB
Freezer 7 Pro
Bios F12
Vista Ultimate x64 SP1
Hey all,
couple of weeks a go i bought new ram (G.SKILL 4096MB GBPK). ever since im having some bad issues with my system. Every now and then im getting a BSOD (in a middle of a game or when im playing a movie). most of the times, after the BSOD the boot times take really long and hangs on the vista logo.. takes up to 160 to enter windows. First thing i did was to memtest my ram, at first it came out clean after 8 hours by last night i tried it again and im getting errors.
Can you please tell me if my bios settings are ok before i'll try each stick separately?
Thanks
MB Intelligent Tweaker(M.I.T.)
Robust Graphics Booster ...............: auto
CPU Clock Ratio ..........................: x8
Fine CPU Clock Ratio.....................:.?
CPU Frequency ...........................: 2.666
Clock Chip Control
Standard Clock Control
CPU Host Clock Control..................: [Enabled]
CPU Host Frequency (Mhz) ............: 333Mhz
PCI Express Frequency (Mhz) .........:auto
S.M.A.R.T Enabled
C.I.A.2 .................................:[Disabled]
DRAM Performance Control
Performance Enhance...................: [STANDARD]
Extreme Memory Profile (X.M.P.).....:
(G)MCH Frequency Latch...............:
System Memory Multiplier ..............: auto
Memory Frequency (Mhz) ..............: 800
DRAM Timing Selectable ................: [Manual]
Standard Timing Control
CAS Latency Time........................4
tRCD .........................................4
tRP'...........................................4
tRAS..........................................12
Advanced Timing Control
tRRD..........................................auto
tWTR..........................................auto
tWR............................................aut o
tRFC...........................................aut o
tRTP...........................................aut o
Command Rate (CMD) ....................:?
Driving Strength Profiles
Driving Strength ............................
Motherboard Voltage Control
Voltage Type.???... Manual
DDR2 Overvoltage Control....................+0.3
PCI-E Overvoltage Control....................+0.1
FSB Overvoltage Control......................+0.1
(G)MCH Overvoltage Control..................+0.1
CPU Voltage Control.............................1.3000
Advanced Settings
Limit CPUID Max. to 3.....................: [Disabled]
No-Execute Memory Protect............: [Disabled]
CPU Enhanced Halt (C1E)................: [Disabled]
C2/C2E State Support....................: [Disabled]
x C4/C4E State Support..................: [Disabled]
CPU Thermal Monitor 2(TM2) ...........: [Disabled]
CPU EIST Function.........................: [Disabled]
Virtualization Technology................: [Enabled]
GA-P35-DS3 (rev. 1.0)
G.SKILL 4096MB GBPK
ALBATRON 8800GTS 320MB
WD 640GB
WD 320GB
Freezer 7 Pro
Bios F12
Vista Ultimate x64 SP1
Hey all,
couple of weeks a go i bought new ram (G.SKILL 4096MB GBPK). ever since im having some bad issues with my system. Every now and then im getting a BSOD (in a middle of a game or when im playing a movie). most of the times, after the BSOD the boot times take really long and hangs on the vista logo.. takes up to 160 to enter windows. First thing i did was to memtest my ram, at first it came out clean after 8 hours by last night i tried it again and im getting errors.
Can you please tell me if my bios settings are ok before i'll try each stick separately?
Thanks
MB Intelligent Tweaker(M.I.T.)
Robust Graphics Booster ...............: auto
CPU Clock Ratio ..........................: x8
Fine CPU Clock Ratio.....................:.?
CPU Frequency ...........................: 2.666
Clock Chip Control
Standard Clock Control
CPU Host Clock Control..................: [Enabled]
CPU Host Frequency (Mhz) ............: 333Mhz
PCI Express Frequency (Mhz) .........:auto
S.M.A.R.T Enabled
C.I.A.2 .................................:[Disabled]
DRAM Performance Control
Performance Enhance...................: [STANDARD]
Extreme Memory Profile (X.M.P.).....:
(G)MCH Frequency Latch...............:
System Memory Multiplier ..............: auto
Memory Frequency (Mhz) ..............: 800
DRAM Timing Selectable ................: [Manual]
Standard Timing Control
CAS Latency Time........................4
tRCD .........................................4
tRP'...........................................4
tRAS..........................................12
Advanced Timing Control
tRRD..........................................auto
tWTR..........................................auto
tWR............................................aut o
tRFC...........................................aut o
tRTP...........................................aut o
Command Rate (CMD) ....................:?
Driving Strength Profiles
Driving Strength ............................
Motherboard Voltage Control
Voltage Type.???... Manual
DDR2 Overvoltage Control....................+0.3
PCI-E Overvoltage Control....................+0.1
FSB Overvoltage Control......................+0.1
(G)MCH Overvoltage Control..................+0.1
CPU Voltage Control.............................1.3000
Advanced Settings
Limit CPUID Max. to 3.....................: [Disabled]
No-Execute Memory Protect............: [Disabled]
CPU Enhanced Halt (C1E)................: [Disabled]
C2/C2E State Support....................: [Disabled]
x C4/C4E State Support..................: [Disabled]
CPU Thermal Monitor 2(TM2) ...........: [Disabled]
CPU EIST Function.........................: [Disabled]
Virtualization Technology................: [Enabled]
Comment