Announcement

Collapse
No announcement yet.

F2 8800cl5d-4gbpi

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • F2 8800cl5d-4gbpi

    I've just bought G.Skill ram F2 8800CLD with P5Q Deluxe
    My CPU is Q6600 and I overclock to 8*458 with Ram speed 1100 Ram Volt 1.9, 2.0, 2.1,2.2 (try every voltage) others set auto.

    It's always show Blue Screen " DRIVER_IRQL_NOT-LESS_OR_EQUAL

    STOP 0X000000D1 (0X000000008, 0X00000002, 0X000000000, 0XB3AB347F)

    ha 20x22k.sys - Address B3AB347F base at B3A4E000, Date stamp 4899a092

    Begaining dump of physical memory
    Physical memory dump complete
    Contact your system administrator or technical support group for further assistance.

    Question

    1. Why this happend when I use this ram? other ram don't (DDR2 800 or 1066)
    2. I can not reach to the spec of ram 8800 (or 1100 MHz) Which way I can go for that?
    3. How can I solve this problem?
    4. Is ram defect? It's new (I've just bought it)

  • #2
    are you sure your Q6600 could run with FSB 458?
    try to run DDR2 1100 with 330 FSB
    If it still can't work, try to install one at one time to see if one is defective
    thanks


    G.S

    Comment

    Working...
    X