F3-12800CL7D-4GBRH on Asus P7P55D EVO

[irfy]

Hi im currently running this 4GB kit with i7 860 181 bclk X 21 multi 3.8Ghz
Cas 8 8 8 24 1T 1.65v DDR3 1810.

This kit is the 1st DDR3 ram ive ever owned. Ive gota say Its simply awesome very versatile. Only niggle i have. Ive tested the rig with OCCT 3.01 is finishes the 1 hour stress test no probs. When i leave the rig runnin for like 5 hrs or more the PC suddenly halts no blue screens just gets stuck cant move mouse or keyboard. Have to push reset which is annoying.

Can someone help with Ram timings at this speed DDR1810 & also for DDR3 2000.
I want to try manual settings not AUTO.

My rig is cooled with Corsair H50-1 idle temp 22c highest load 72c

Thanx in advance

[GSKILL TECH]

Simply enter them manually based on the AUTO settings, then relax or tighten accordingly as long as it is stable.

DDR3-2000 will require too much voltage and may not be able to run.

Thank you
GSKILL SUPPORT

[irfy]

Was hoping you look these numbers over. DDR3 1810

1st info 8-8-8-24-4-88-9-5-28

Dram Cas Latency 8
Dram Ras to Cas Delay 8
Dram Ras PRE Time 8
Dram Ras Act Time 24
Dram Ras to Ras Delay 4
Dram REF cycle time 88
Dram Write recovery time 9
Dram read to pre time 5
Dram Four ACT Win Time Auto (28)
Dram Back to Back Cas delay Auto ??? <-- whats this

Dram timing mode 1N

--------- all other settings are set to auto

2nd info 1N-51-54


3rd info 7-7-19-9-9-9-7-6-4-7-7-4

[GSKILL TECH]

All timings look fine, the advanced timings depend on what your motherboard wants, so simply set those to AUTO.

Thank you
GSKILL SUPPORT