Announcement

Collapse
No announcement yet.

ga-ex58-ud4p with f3-15000cl9t-6gbtd

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • ga-ex58-ud4p with f3-15000cl9t-6gbtd

    ga-ex58-ud4p with f3-15000cl9t-6gbtd Problem.
    They run at a speed of 1066 Mhz Instead 1866 Mhz.
    What this Board settings please.

  • #2
    In MIT,

    CPU Clock Ratio - 18

    Base Clock (BCLK) Control - 187

    Performance Enhance - Standard
    System Memory Mulitiplier - 10
    DRAM Timing Selectable - Manual
    CAS Latency - 9
    tRCD - 9
    tRP - 9
    tRAS - 24
    Command Rate - 2

    Same for other 3.

    CPU VCore - 1.32V
    QPI/VTT Voltage - 1.50V
    CPU PLL - 1.90V

    DRAM Voltage - 1.65V

    You can also try the XMP-DDR3 1866 Profile to see if that will be stable.

    GSKILL SUPPORT

    Comment


    • #3
      I forgot to mention my Processor is i7 920 2.66 Ghz Is this the same settings?

      Comment


      • #4
        Should be fine, it's stock settings


        Pls offer comments on support I provide, HERE, in order to help me do a better job here:

        Tman

        Comment

        Working...
        X