[B]F3-12800CL8TU-6GBPI 3x2 Rampage II GENE[/B]

[Serelaw]

I also have Rampage II Gene
Bios 904
F3-12800CL8TU-6GBPI 3x2
i-7 co Dark KNight cooler

I have followed the settings in two of these GENE threads and have some stability.

Supposed to go 1600 @88821 @1.65

It even freezes with the ram at 1066 but not as often.

My system freezes and I notice the USB mouse and keyboard Quit.(Lights go out on them)

I am calling Tech support today.. I'm thinking this ram is not the best suited for this MB

I ordered the wrong stuff from NEWegg and said WTF I will try it any way.

Will this memory work with this board guys?

Tia (Thanks in Advance)

Serelaw

[Serelaw]

Well dicking with it I got it to 1603 memory and 4.09 Cpu with 4.200

on one core just did some Futuremark 06
I will try Prime later on. Played some L4D and it did'nt crash yet

Maybe this is it.

[GSKILL TECH]

What are your voltages? They should look something on the lines of this:

AI overclock - manual
OC from CPU level up - auto
OC from Memory level up - DDR3-1600
CPU Ratio setting - 18 for 3.6GHz
CPU Turbo Power Limit - disable

CPU configuration
CPU Ratio Setting - whichever you chose above
C1E Support - disable
Hardware prefetcher - enable
Adjacent Cache line prefetcher - enable
Intel Virtualization tech - disabled
CPU TM Function - disable
Execute Disabled bit - disabled
Intel HT Technology - disable
Active Processor Cores - all
A20M - disabled
Intel C-STATE tech - disabled

BCLK frequency - 160
PCIE frequency - 100
DRAM frequency - 1600 MHz
UCLK frequency - 3200 MHz
QPI frequency - auto

Dram Timing Control
DRAM CAS# Latency - 8
DRAM RAS# to CAS# Delay - 8
DRAM RAS# PRE Time - 8
DRAM RAS# ACT Time - 21
DRAM REF Cycle Time - 74
DRAM Timing Mode - 2N
All others can be on AUTO

EPU II Phase Control - Full Phase
Load-line calibration - enable
CPU differential amplitude - auto
Extreme OV - disabled


CPU voltage - 1.30V
CPU PLL voltage - 1.85V
QPI-DRAM voltage - 1.50V

IOH voltage - 1.35V
IOH PCIE voltage - 1.60V
ICH voltage- 1.20V
ICH PCIE voltage - 1.60V

DRAM Bus voltage 1.65V

CPU spread spectrum - disabled
PCIE spectrum - disabled
CPU clock skew - auto
IOH clock skew - auto

Thank you
GSKILL SUPPORT