Announcement

Collapse
No announcement yet.

24GB Ripjaws for EVGA E759

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • 24GB Ripjaws for EVGA E759

    I have EVGA E759 CLASSIFIED LIMITED EDITION 3-Way SLI (x16) + PhysX w/ECP & NF200 1366 Intel X58 EATX Intel Motherboard and want to use G.SKILL Ripjaws Series 16GB (4 x 4GB) 240-Pin DDR3 SDRAM DDR3 1600 (PC3 12800) Desktop Memory Model F3-12800CL9Q-16GBRL and G.SKILL Ripjaws Series 8GB (2 x 4GB) 240-Pin DDR3 SDRAM DDR3 1600 (PC3 12800) Desktop Memory Model F3-12800CL9D-8GBRL. My CPU is i7 975..

    Does somebody have any experience with this kind of set-up? Please share.

    Thanks Andrejmart

  • #2
    I doubt it, please share your experience here if you choose to do so.

    Thank you
    GSKILL SUPPORT

    Comment


    • #3
      Hi GSKIL TECH,

      Can you please elaborate on the "I doubt it."

      Thanks
      Andrejmart

      Comment


      • #4
        I mean I doubt anyone is running this exact combination since the RipJaws series is new and you are also using an X58 platform. Typically people purchase triple channel memory for the X58.

        Thank you
        GSKILL SUPPORT

        Comment


        • #5
          There are only two manufacturers that have (commercially) available DDR3 4GB modules, G.Skill and Kingston. For the G.SKILL Ripjaws 4GB's to work with i7 CPU I need to be able to program the memory to run triple chanel or hex-chanel (for 24Gb). Is there a way?

          Thanks Andrejmart

          Comment


          • #6
            If you run three DIMMs they will be able to operate in triple channel mode. Here are some results on a E760, but 6GB.

            DDR3-2142

            8-9-8-24
            24x uncore, 1.66 VDIMM, +350 VTT, 2:12 memory multi, BCLK 167

            They actually perform quite well if not better on the X58 than P55.

            Thank you
            GSKILL SUPPORT

            Comment

            Working...
            X