GSkill Ripjaws V F4-3000C15D-16GVRB 2T to 1T

[NIK1]

I have a new Asus Z270 Maximus IX Apex mb and have enabled xmp on my RipjawsV 15-16-16-35 2T with 1.350 volts.So far in tweaking I lowered the first timing from 15 to 14 with 1.350 volts and its good.Just wondering what I need for voltages to try to get it to work with the stock xmp timings from 2T to 1T..I did try 1T with 1.350v and she would not boot. Any suggestions appreciated...

[GSKILL TECH]

May not be capable, you can try a higher DRAM voltage to see if that helps.

[NIK1]

How high is safe to go with RipjawsV.

[GSKILL TECH]

1.50V, but of course only if it needs that much and will utilize the power.