Ddr3 1600

[Johnor]

I bought the following kit online G.SKILL F3-12800CL9T-6GBNQ 6GB DDR3 3X2GB DDR3-1600 CL 9-9-9-24 Triple Channel Memory Kit. It only seems to boot properly at 1066mhz

I'm running it on an intel DX58SO motherboard with an i7 920 processor.

According to intel this board supports 1600mhz. (see link)

[HTML]http://www.intel.com/products/desktop/motherboards/DX58SO/DX58SO-overview.htm[/HTML]

I don't plan on overclocking the cpu or the ram. I just need to know the ideal settings to get this ram running at 1600mhz. i.e. timings/multipliers/voltages and anything else I may need to set.

Thanks in advance.

[GSKILL TECH]

In Memory Configuration of the Performance tab, set Performance Memory Profile to [Manual].

For UCLK Multiplier, set that to 24.
Memory Multiplier - 12
tCL - 9
tRCD - 9
tRP - 9
tRAS - 24
tRFC - 60
tRRD - 4
tWR - 8
tWTR - 4
tRTP - 4
Memory Voltage - 1.65V

Command Rate - 2

Save and exit and you computer should be running smoothly. Let me know how it goes.

Thank you
GSKILL SUPPORT